Yaesu VX-8DR Operating Manual page 140

S M
ET ODE
S M I
ET ODE TEM
1: ANTENNA AM
2: ANTENNA FM
3: ANTENNA ATT
4: APO
5: ARTS BEEP
6: ARTS INTERVAL
7: BANK LINK
8: BANK NAME
9: BCLO
10: BEEP EDGE
11: BEEP LEVEL
12: BEEP MELODY
13: BEEP SELECT
14: BELL RINGER
15: BELL SELECT
16: BLUETOOTH P-CODE
17: BLUETOOTH SET
18: BUSY LED
19: CH COUNTER
20: CLOCK SHIFT
21: CW ID
22: CW LEARNING
23: CW PITCH
24: CW TRAINING
25: DC VOLTAGE
26: DCS CODE
27: DCS INVERSION
28: DTMF DELAY
29: DTMF MANUAL/AUTO
30: DTMF SELECT
31: DTMF SPEED
32: EAI
33: EAI TIME
34: EMERGENCY SELECT
35: EXTENDED MENU
36: FW KEY HOLD TIME
37: HALF DEVIATION
38: HOME VFO
39: HOME/REVERSE
40: INT MANUAL/AUTO
41: INTERNET
42: INTERNET CODE
43: INTERNET KEY
44: INTERNET MODE
45: INTERNET SELECT
46: LAMP
47: LANGUAGE
48: LCD CONTRAST
49: LCD DIMMER
50: LED LIGHT
51: LOCK
52: MEMORY FAST STEP
53: MEMORY NAME
54: MEMORY PROTECT
138
F
Select the antenna to be used in the AM Broadcast listening.
Select the antenna to be used in the FM Broadcast listening.
Enables/Disables the receiver Front-end Attenuator.
Setting of the Automatic Power-Off time.
TM
Select the Beep option during ARTS
Select the Polling Interval during ARTS
Enables/Disables the Memory Bank Link Scan.
Stores Alpha-Numeric "Tag" for the Memory Bank.
Enables/disables the Busy Channel Lock-Out feature.
Enables/disables the Band-edge beeper while selecting the frequency by the DIAL knob.
Adjust the Beep volume level.
Create the Beep Melody for Bell ringer function.
Enables/Disables the keypad beeper.
Selects the number of Bell ringer repetitions.
Enables/Disables the Bell ringer function and its sound selection.
®
Pairing the Bluetooth unit and setting the Pin Code.
Select the operating mode of the optional BH-1A/BH-2A Bluetooth
Enables/Disables the BUSY LED while the squelch is open.
Selects the Channel Counter Search Width.
Shifting of CPU clock frequency.
Program and activate the CW Identifier (used during ARTS
Enables/Disables the CW Learning feature.
Select the CW tone pitch for the CW Learning, CW Training, and CW Identifier functions.
Enables/Disables the CW Training feature.
Indicates the DC Supply Voltage.
Setting of the DCS code.
Enables/Disables the "Inverted" DCS tone.
Selects the DTMF Autodialer Delay Time.
Enables/Disables the DTMF Autodial feature.
Programming of the DTMF Autodialer.
Selects the DTMF Autodialer Sending Speed.
Enables/Disables the Emergency Automatic ID (EAI) feature.
Sets the Emergency Automatic ID (EAI) operating mode and its transmit time.
Select the alarms utilized when the Emergency function is engaged.
Enables/Disables the extended Set Mode Menu.
Set the duration that a secondary function of the [ F/W ] key (press and holding the [ F/W ] key)
is held determines the function they activate.
Reducing the Deviation level by 50 %.
Enables/Disables the function of the VFO DIAL knob, while in the Home Channel mode.
Selects the primary function of the [ H/M ] key (press the [ H/M ] key).
Enables/Disables the DTMF Autodialer feature while operating using the Internet Connec-
TM
tion feature (WIRES ).
Enables/Disables the Internet Connection feature (WIRES
Selects the Access Number (DTMF digit) for the SRG operation of the Internet Connection
TM
feature (WIRES ).
Selects the primary function of the [ INTERNET ] key.
Selects the operating mode of the Internet Connection feature (WIRES
Programming of the Access Number (DTMF code) for the FRG station of the WIRES
TM
non WIRES Internet Link System) access.
Selects the LCD/Keypad Lamp mode.
Selects the language for the Set Mode selections.
Setting of the Display contrast level.
Setting of the Display brightness level.
Illuminates the white LED light continuously (useful as emergency flashlight at night).
Selects the Control Locking lockout combination.
Selects the channel step for the fast channel selection mode while in the Memory Recall
mode.
Stores "Alpha-Numeric" tags for the Memory channels.
Enables/Disables the Memory Write Protector.
UNCTION
operation.
TM
operation.
®
Headset.
TM
operation).
TM
).
TM
).
VX-8DR/DE O
A V
VAILABLE
( D
: B
EFALT OLD
BAR & EXT / BAR ANTENNA
EXT ANTENNA / EAR PHONE
ON / OFF
0.5hour - 12.0hour / OFF
IN RANGE / ALWAYS / OFF
15sec / 25sec
--
--
ON / OFF
ON / OFF
LEVEL 1 ~ LEVEL 9 ( LEVEL 5 )
--
KEY & SCAN / KEY / OFF
1Time - 20Times / CONTINUOUS
OFF / BELL /
USER BP1 / USER BP2 / USER BP3
0000 - 9999 ( 6111 )
VOX: PTT / VOX HIGH / VOX LOW,
MODE: MONO / STEREO,
SAVE: ON / OFF
POWR: ON / OFF
ON / OFF
± 5 MHz / ± 10 MHz / ± 50 MHz / ± 100 MHz
ON / OFF
--
--
400 - 1000 Hz ( 50 Hz/step ) ( 700 Hz )
--
--
104 standard DCS codes ( DCS 023 )
RX-NORMAL, TX-NORMAL /
RX-INVERT, TX-NORMAL /
RX-BOTH, TX-NORMAL /
RX-NORMAL, TX-INVERT /
RX-INVERT, TX-INVERT /
RX-BOTH, TX-INVERT
50ms / 250ms / 450ms / 750ms / 1000ms
MANUAL / AUTO
--
50ms / 100ms
ON / OFF
INT 1min ~ INT 9min / INT10min / INT15min /
INT20min / INT30min / INT40min / INT50min /
CON 1min ~ CON 9min / CON10min /
CON15min / CON20min / CON30min /
CON40min / CON50min ( CON 5min )
BEEP / STROBE / BEEP&STROBE /
BEAM / BEEP&BEAM / CW / BEEP&CW /
CW-ID TX
ON / OFF
FW0.3sec / FW0.5sec / FW0.7sec /
FW1.0sec / FW1.5sec
ON / OFF
DISABLE / ENABLE
HOME / REV
MANUAL / AUTO
ON / OFF
DTMF 0 ~ DTMF 1, DTMF A ~ DTMF D,
DTMF , DTMF # ( DTMF 1 )
INTERNET / INTERNET SELECT /
SET MODE
FRG / SRG
TM
(or --
KEY 2sec - KEY10sec / CONTINUOUS /
OFF ( KEY 5sec )
ENGLISH / JAPANESE
LEVEL 12 ~ LEVEL32 ( LEVEL24 )
LEVEL 1 ~ LEVEL 4
--
KEY / DIAL / KEY&DIAL / PTT / KEY&PTT /
DIAL&PTT / ALL
10CH / 20CH / 50CH / 100CH
--
ON / OFF
PERATING
ALUES
)
I
TALIC
M
ANUAL