Product Overview; Controls - Toro 22615 Operator's Manual

119-4692
1. Warning—stop the engine; use both hand holds to lift the
grinder.
119-4693
1. Thrown object hazard—keep bystanders a safe distance
from the machine.
117–4979
1. Rotating belt — Keep guard in place
117-2718

Product Overview

1. Throttle lever
2. Hour meter
3. Cyclone air filter
4. Choke
5. Fuel valve
6. Sediment cup
7. Starter

Controls

Become familiar with all the controls (Figure 3 and Figure 4)
before you start the engine and operate the machine.
Throttle Lever
The throttle lever controls engine speed. With the lever down,
in the Disengaged position, the engine runs at idle. This is
also the starting position. When the engine speed increases,
to the Engaged position, the centrifugal clutch engages and
the cutting wheel rotates.
6
Figure 3
8. Cutting wheel
9. Belt cover
10. Lift
11. Fuel Cap
12. Parking brake
13. Safety bail
14. Handle