Setting Your Location To Home; Viewing Photos, Playing Music And Watching Videos On A Usb Memory Stick; Install Channels; Autoprogram - Philips 65PFL4909 User Manual

To obtain a more detailed electronic copy of this User Manual, go to www.philips.com/support

Setting your Location to Home

You can set the Location of your TV to Home or Retail.
Choosing Home gives you full flexibility to change predefined
settings for Picture and Sound.
1
Display Setup using Home Menu and use H I to Select
Installation, then press OK.
Settings assistant Language
Picture Channels
Sound Preferences
Features Network
Restore default settings
Installation
Software
2
Use H I to Select Preferences, then press OK.
3
Use H I to Select Location, then press OK.
4
Use H I to Select Home, then press OK.
Note(s)
O
You must set Home in the Menu. Otherwise, personalized
●
Picture and Sound Settings will Not Be Memorized after the Unit
goes into Standby Mode.
Viewing Photos, Playing Music and
Watching Videos on a USB Memory Stick
Your TV is fitted with a USB connection that enables you to
view photos, listen to music or watch video files stored on a
USB Memory Stick.
1
Press Q and use H I J K to select Browse USB, then
press OK.
2
Use H I to select the Picture, Music or Video, then
press OK.
These Recorded Files must meet Specifications shown below:
●
Picture (JPEG)
Upper limit
Music (MP3)
Sampling frequency
Constant bit rate
Video (MPEG / VOB / AVI / MP4)
Maximum size
of a video
Extension
.mpg, .mpeg
Video codec
MPEG1,
MPEG2
Audio codec
Dolby Digital
YES
MPEG1 audio
YES
layer3 (MP3)
MPEG1 audio
YES
layer2
LPCM
YES
AAC-LC
NO
English

Autoprogram

Location
Network settings assistant
Reset AV settings
16Mpixel
32 kHz, 44.1 kHz or 48 kHz
32 kbps - 320 kbps
1920 x 1080
.vob .avi
MPEG4 SP,
MPEG2 MPEG4
ASP
YES YES
NO YES
NO YES
NO NO
NO NO
Note(s)
O
This unit accepts USB Memory Stick only. Other storage devices
●
such as external HDD by USB Bus Power will not work.
Do not use an extension cord and USB Hub to connect devices
●
to this Unit. Always insert the USB flash memory in to this Unit
directly.
We cannot be held responsible if your USB Memory Stick is Not
●
Supported, nor will we accept any liability for damage or loss of
stored data.
The USB Memory Stick is Not Supplied with this TV.
●
A maximum of 1,023 folders or files can be recognized.
●
A file name exceeding 256 characters or contains a dot character
●
is Not Supported on this TV.
Progressive JPEG files are Not Supported.
●

5 Install Channels

Autoprogram
Be sure the RF cable is correctly connected to this Unit and
you are registered with your Cable TV provider when you
Install Cable channels.
1
Display Setup using Home Menu and use H I to Select
Installation, then press OK.
2
Use H I to Select Channels, then press OK.
3
Use H I to Select Autoprogram, then press OK.
4
Press OK to Select Start now.
Autoprogram will start automatically.
●
System searching. Please wait...
Digital channels found:
Analog channels found:
Auto programming may take more than 20 minutes to
complete.
If you run Autoprogram when you have Locked Channels, a
●
Message appears asking to enter your PIN. Enter your PIN in
order to Complete the Installation. You need to set the
Channel Lock again after the Installation.
When the Scanning and Memorizing of Available Channels is
●
Completed, the Lowest Memorized Channel will be
Displayed.
5
Follow the On-screen Instructions to Complete the
.mp4
Installation.
H.264,
MPEG4
NO
NO
NO
NO
YES
14
0
0
Stop