Table of Contents
Advertisement
2.1
Detaching the base
To detach the base, perform the following:
1.
Disconnect power and signal cables. Carefully put the front of the
monitor face down on a clean table.
2.
Use your fingers to loosen the screw located at the bottom of the
base, and remove the base from the stand.
3.
Or, you may directly use a screwdriver to remove the screw that
secures the base to the stand, and detach the base from the stand.
•
•
2-1
We recommend that you cover the table surface with soft cloth to prevent
damage to the monitor.
Hold the base while removing the screw.
Chapter 2: Setup
Hide quick links:
Advertisement
Table of Contents
