Get Started; Charge The Built-In Battery; Switch To Standby Mode; Turn On/Off - Philips BT50 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Charge the built-in battery

The speaker is powered by a built-in
rechargeable battery.
Note
•
Before use, fully charge the built-in battery.
•
The micro USB socket is for charging only.
•
It takes you approximately two hours to fully charge
the battery.
•
Rechargeable battery has a limited number of charge
cycles. Battery life and number of charge cycles vary by
use and settings.
Connect the USB cable between
the DC IN socket on the speaker, and
•
• a USB socket on a computer.
The LED indicator indicates the battery status.
EN
4
Under charging Fully charged
"OFF" Flashing white
mode
"AUDIO Flashing white
IN" mode
"Bluetooth" Flashing blue
mode or solid blue
(depending
on Bluetooth
connection
status)

Turn on/off

• To turn the speaker on, slide the source
selector to AUDIO IN or .
• To turn the speaker off, slide the source
selector to OFF.

Switch to standby mode

The speaker switches to standby mode
automatically in the following situations:
• In Bluetooth mode, the connection with
Bluetooth device is invalid for 15 minutes;
or
• In AUDIO IN mode, no audio input cable
is connected for 15 minutes.
Off
Solid white
Flashing blue
or solid blue
(depending
on Bluetooth
connection
status)