Kenwood DDX9902S Instruction Manual page 55

SETTINGS SETTINGS
Setting the speakers—speaker size and
crossover frequency
1
Display the <Speaker Select> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
2
Select the speaker type (front speakers,
rear speakers, or subwoofer).
3
Select the size of the selected speaker.
4
Adjust the crossover frequency of the
selected speaker.
<Gain> Adjusts the output volume of
the selected speaker.
<HPF FREQ> Adjusts the crossover frequency
for the front or rear speakers
(high pass filter).*
<LPF FREQ> Adjusts the crossover for the
subwoofer (low pass filter).*
<Slope> Adjusts the crossover slope.
<Phase> Selects the phase for the
subwoofer.* 2
* 1 Appears only when the front or rear speakers are selected.
* 2 Appears only when the subwoofer is selected.
Setting the listening position
You can adjust the sound effects according to your
listening position.
1
Display the <Position> screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Audio> menu screen.
1
2
Select the listening position ([All],
2
[Front L], [Front R] or [Front All]).
ENGLISH 55