Kenwood DDX9902S Instruction Manual page 49

BLUETOOTH BLUETOOTH
Sending text during a call
You can send text during a call using the DTMF (Dual
Tone Multi Frequency) function.
While talking...
Switching between two connected
devices
When 2 devices are connected, you can change the
device to use.
On the phone control screen:
• The name of the active device appears. The
devices are switched each time the button is
pressed.
Making a call
1
Display the phone control screen.
On the <TOP MENU> screen:
• Press [K] to change the page on the <TOP
MENU> screen.
• You can also display the phone control screen
by pressing TEL on the monitor panel.
2
Select a method to make a call.
1 2
4
• You can show more items by pressing [J]/[K].
1 From the phone book*/call lists
2 Direct number entry
3 From the preset list
• To preset, see page 51.
4 Voice dialing
• You can display the <Bluetooth Setup>
screen by pressing [
* When the mobile phone is not compatible with Phone Book Access
Profile (PBAP), the phone book is not displayed.
From the preset list/phone book/call lists
1
From the preset list
[ ]
From the phone book
[ ]
From the missed call list
[ ]
3
From the received call list
[ ]
From the dialed call list
[ ]
2
Select the target (1), then make a call (2).
• You can change the page to display more
items by pressing [J]/[K].
]
Continued on the next page...
ENGLISH 49