Kenwood DDX9902S Instruction Manual page 43

OTHER EXTERNAL COMPONENTS OTHER EXTERNAL COMPONENTS
Displaying the picture from the rear
view camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.
To display the picture from the rear view camera
manually
(Hold)
• This operation works only when <AUD Key Long
Press> is set to [R-CAM]. (Page 63)
• You can change the picture settings using
[Aspect]/[PictureAdjust]. (Page 56)
To exit the rear view screen: Press and hold the
same button again.
Using the parking guidelines
You can display parking guidelines to enable easier
parking when you shift the gear to the reverse (R)
position.
Displaying the parking guidelines
1
Display the <Display> setting screen.
On the <TOP MENU> screen:
• Press [K] repeatedly to change the page on
the <Display> menu screen.
2
To deactivate: Select [OFF] for <Parking
Guidelines>.
Adjusting the parking guidelines
Adjust the parking guidelines according to the size
of the car, parking space and so on.
• Install the rear view camera in the appropriate
position according to the instructions supplied
with the rear view camera.
• When adjusting the parking guidelines, make sure
to use the parking brake to prevent the car from
moving.
1
Display the <Display> setting screen. (See
the left column).
• Press [K] repeatedly to change the page on
the <Display> menu screen.
2
3
Adjust the parking guidelines by selecting
the mark (1), then adjusting the
position of the selected
Make sure that A and B are horizontally
parallel, and that C and D are the same length.
• Press and hold [Initialize
to set all the marks to the initial default
position.
mark (2).
] for 2 seconds
ENGLISH 43