Cd Player; Connecting The Stereo Receiver And Cd Player; Ac Power Connection - Pioneer XC-P01-S Operating Instructions Manual

Connecting your equipments

CD player

Connecting to a digital audio device
You can connect the CD player to a digital device using a
coaxial cable (commercially available).
DIGITAL IN
COAXIAL
CD player
12
En
• The audio of iPod/iPhone/iPad mini is not output from the
COAXIAL OUT socket of the CD player.

Connecting the stereo receiver and CD player

Connect the stereo receiver and CD player using the supplied
remote control cable and RCA audio cable.
Stereo receiver (XC-P01 for example)
AV receiver, D/A
converter, etc.
Coaxial cable
(commercially
Remote
available)
control
cable
CD player
• Make sure to connect the stereo receiver and the CD
player using the supplied remote control cable and RCA
audio cable.

AC power connection

After checking all the connections have been made correctly,
plug the AC power lead of this unit into the wall socket.
• Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
• Handle the power cord by the plug. Do not pull out the
Wall socket
plug by tugging the cord and never touch the power cord
(AC 220 V to 230 V, 50 Hz)
when your hands are wet as this could cause a short
circuit or electric shock. Do not place the unit, a piece of
furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The
power cords should be routed such that they are not likely
to be stepped on. A damaged power cord can cause a fire
or give you an electrical shock. Check the power cord
once in a while. When you find it damaged, ask your
nearest PIONEER authorized service centre or your dealer
for a replacement.
RCA audio cable
Note
CAUTION