Sharp FACSIMILE FO-2950M Service Manual page 10

FO-2950MGR/GH/MY/TH
2) Connect the extension phone line to the TEL. SET socket.
5. Loading Printing Paper
You can load up to 200 sheets of A4 paper (max. 80 g/m
paper tray.
Caution!
Do not use the blank side of paper that has already been printed on.
1
Pull out the paper tray extension.
2
Fan the paper, and then tap the edge against a flat surface to
even the stack.
3
Pull the paper release lever toward you.
Insert the stack of paper firmly into the tray, print side up.
4
• Make sure that the stack is not higher than the marked line.
Loading too much paper may cause paper jams and misfeeds.
• If paper remains in the tray, take it out and combine it into a
single stack with the new paper before adding the new paper.
Important:
Be sure to load the paper so that printing takes place on the
print side of the paper. Printing on the reverse side may result in
poor print quality.
Make sure the stack of paper is aligned against the right paper
5
guide, and then gently move the left paper guide to the A4 posi-
tion. (GR/GH : or to the 8 1/2 position for letter or legal paper)
) in the
2
Push the paper release lever back down.
6
• Note: If the paper does not feed correctly, remove the entire
stack from the tray and repeat the loading procedure from the
beginning.
[GR/GH only]
7
The fax has been set at the factory to scale the size of received
faxes to letter size paper. If you have loaded legal paper, you
must change the paper size setting to legal. Press these keys:
FUNCTION
The display will show:
PAPER SIZE
1=LETTER, 2=LEGAL
Press 1 to select LETTER or 2 to select LEGAL.
(You can also press 3 to select A4. )
The display will briefly show your selection and then show :
FINE PRIORITY
1=YES, 2=NO
Press the STOP key to return to the date and time display.
1 – 8
4
PAPER SIZE
3=A4
1
LETTER :
2
LEGAL :
3
A4 :
STOP