Shooting Set (Items For Customized Shooting) - Sony HDR-CX300 Operating Manual

SHOOTING SET
(Items for customized
shooting)
See "Using menus" (p. 61) on the operation.
The default settings are marked with Ô.
/ SET
See page 25.
REC MODE (Recording
mode)
See page 25.
GUIDEFRAME
You can display the frame and check that
the subject is horizontal or vertical.
The frame is not recorded.
Ô OFF
Does not display the guide frame.
ON
Displays the guide frame.
Tips
¼
Positioning the subject at the cross point of the
guide frame makes a balanced composition.
The outer frame of [GUIDEFRAME] shows the
display area of a TV which is not compatible
with full pixel display.
STEADYSHOT
You can compensate for camera shake.
Set [ STEADYSHOT] to [OFF] (
when using a tripod (sold separately), then
the image becomes natural.
Ô ACTIVE
Provides a more powerful SteadyShot effect.
STANDARD
Provides the SteadyShot effect under relatively
stable recording conditions.
OFF (
The SteadyShot function is not used.
¦
Notes
If you change the setting of
[ STEADYSHOT], the imaging field will also
change accordingly.
You can magnify images up to 12 times using
optical zooming, unless [
set to [ACTIVE].
CONVERSION LENS
When using a conversion lens (sold
separately), use this function to record
using the optimum compensation for
camera shake and focus for the lens.
Ô OFF
Select this when you do not use a conversion
lens.
WIDE CONVERSION ( )
Select this when you use a wide-conversion
lens.
TELE CONVERSION ( )
Select this when you use a tele-conversion
lens.
¦
Notes
The built-in flash is not flashed when
[CONVERSION LENS] is set to other than
[OFF], you cannot also set [FLASH MODE]
(p. 75).
)
)
STEADYSHOT] is
US
71