Self-Diagnosis Display/Warning Indicators - Sony HDR-CX300 Operating Manual
Digital hd video camera recorder
Hide thumbs
Also See for HDR-CX300:
- Handbook (119 pages) ,
- Service manual (63 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Cannot use
Because of following settings
[PRIORITY
[GOLF SHOT], [SMTH
SETTING]/
SLW REC], [
DIGITAL
[SMILE
ZOOM], [SPOT MTR/FCS],
DETECTION]/
[SPOT METER], [SPOT
[SMILE
FOCUS], [EXPOSURE],
SENSITIVITY]
[FOCUS], [TWILIGHT],
[SUNRISE&SUNSET],
[FIREWORKS],
[LANDSCAPE],
[SPOTLIGHT], [BEACH],
[SNOW], [WHITE BAL.],
[
FADER], [
SELF-
TIMER]
[SCENE
[GOLF SHOT], [SMTH
SELECTION]
SLW REC], [LOW LUX],
[
FADER], [TELE
MACRO]
Self-diagnosis display/Warning
indicators
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
C:(or E:) ÿÿ:ÿÿ (Self-diagnosis display)
C:04: ÿÿ
The battery pack is not an “InfoLITHIUM”
battery pack (V series). Use an
“InfoLITHIUM” battery pack (V series)
(p. 105).
Connect the DC plug of the AC Adaptor to the
DC IN jack of your camcorder securely (p. 12).
US
C:06: ÿÿ
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13: ÿÿ / C:32: ÿÿ
Remove the power source. Reconnect it and
operate your camcorder again.
E: ÿÿ : ÿÿ
Follow the steps from
to
on page 85.
(Warning on the internal hard disk of
the camcorder)
Fast flashing
The internal hard disk of the camcorder is full.
An error may have occurred with the internal
hard disk of the camcorder.
™ (Battery level warning)
Slow flashing
The battery pack is nearly used up.
Depending on the operating environment or
battery conditions, ™ may flash, even if there
are about 20 minutes remaining.
(Warning indicator pertaining to
battery pack temperature)
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
(High temperature warning)
Slow flashing
The temperature of your camcorder is getting
higher. Turn off your camcorder and leave it
for a while in a cool place.
Fast flashing
The temperature of your camcorder is
extremely high. Turn off your camcorder and
leave it for a while in a cool place.
(Low temperature warning)
Fast flashing
The temperature of your camcorder is
extremely low. Make the camcorder warm.
Page 92
- Quick Links:
- Step 1: Charging the Battery Pack
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
