Setting Up The Audio Options - Samsung DVD-V440 Instruction Manual

Setting Up the Audio Options

1 With the unit in Stop mode, press the MENU button.
2 Select DVD using
3 Select Audio Setup using
❿
the OK or
4 Use the ,
❷
Then press the OK or
Dolby Digital Out
MPEG-2 Digital Out
DTS
PCM Down Sampling
Dolby Digital Out
1. PCM :
2. Bitstream : Converts to Dolby Digital Bitstream
Be sure to select the correct Digital Output or no
audio will be heard.
MPEG-2 Digital Out
1. PCM :
2. Bitstream : Converts to MPEG-2 Digital Bitstream
Downloaded From Disc-Player.com Samsung Manuals
, buttons, then OK or
❷
Setup
Setup
Display Setup
Setup :
, buttons, then press
❷
button.
buttons to select the desired item.
❿
button.
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
(5.1CH). Select Bitstream when using
the Digital Audio Output.
Converts to PCM(2CH) audio.
Select PCM when using the Analog
Audio Outputs.
(5.1CH or 7.1CH).Select Bitstream
when using the Digital Audio Output.
DTS
❿
button. 1. Off :
2. On :
Dynamic Compression
1. On :
2. Off :
PCM Down Sampling
1. On :
2. Off :
• How to make the SETUP menu disappear or
return to menu screen during set up; Press
RETURN or
• Manufactured under license from Dolby
Laboratories. "Dolby" and the double-D symbol are
trademarks of Dolby Laboratories.
• "DTS" and "DTS Digital Out" are trademarks of
Digital Theater Systems, Inc.
Doesn't output digital signal.
Outputs DTS Bitstream via digital
output only. Select DTS when
connecting to a DTS Decoder.
To select dynamic compression.
To select the standard range.
Select this when the amplifier
connected to the player is not 96KHz
compatible.
In this case, the 96KHz signals will be
down converted to 48KHZ.
Select this when the amplifier
connected to the player is 96KHz
compatible.
In this case, all signals will be output
without any changes.
➛
button.