3. Getting Started - Connecting Devices
How does it work?
When a user tries to access the Camera, our secure server authenticates the
user's identity and permits access to the Camera.
Connect the Camera to the Power Adapter, then plug into a suitable mains
power socket and make sure the ON/OFF Switch is in the ON position. The
Camera must be within range of the Wi-Fi
connect. Make sure the password of the router is available for entering during
the in-app setup process.
Status of LED Indication:
- Pair / Setup state:
- Unconnected state:
- Connected state:
- Ready for connection state: LED is blue and slow flashing
Note: You can only setup via a compatible smartphone or tablet and not via a PC.
LED is red and blue and slowly flashing
LED is red and slowly flashing
LED is blue and always on
View your Camera from any
compatible device remotely
router with which you want to
Getting Started - Connecting Devices