Connecting the Camera to Power
• Insert the small end of the Power Adapter into the Power Adapter Connector
and plug the Power Adapter into a suitable mains power socket.
• Slide the ON/OFF switch to ON, the blue Power LED will light up. (Note: to
switch the device off, slide the ON/OFF switch to OFF.)
Working with Android™ devices
• Run the Hubble for Motorola Monitors application on your Android™
• The Camera view appears on the screen.
Add more cameras
• On Camera view, tap on the Hubble logo to go back to the Add Camera
page. (Picture A13)
• Tap on Add Camera to add one more camera by following the steps for
Android™ device setup in Step 3.2.4. (Picture A14)