Using The Software On The Windows Platform - Preparations - Canon PowerShot A430 User Manual

14
1
Using the Software on the Windows Platform - Preparations
8
When the installation is over, select
[Restart computer immediately
(Recommended)] and clicK [Restart].
Installation of the software has been completed.
At this stage, do NOT remove the Solution
Disk from the CD-ROM drive yet.
o
Restart computer immediately (Recommended)
If there is no need to restart the computer, the [Finish] screen will display. Click [Finish],
remove the Solution Disk from the CD-ROM drive and proceed to Step 10.
9
Remove the disk from the CD-ROM drive when your
normal desktop screen appears after restarting.
This concludes the software installation.
Continue by connecting the camera to the computer so
that the USB driver can be utilized.
[j]
See Uninsta/ling the Software
(p.
74)
to delete the installed programs.
10
Attach the camera to the computer with the
interface cable and set the camera to the
correct mode for connecting.