Using The Software On The Windows Platform - Preparations; Installing The Software And Usb Driver - Canon SD400 - PowerShot Digital ELPH Camera Software Starter Manual

10
Using the Software on the Windows
This chapter explains the basic procedures for installing the software and connecting the
camera to a computer. Read this material before you connect the camera to the computer.

Installing the Software and USB Driver

Start by installing the software from the Canon Digital Camera Solution Disk.
• You must install the software before you connect the camera to the
computer.
• Users of Windows XP and Windows 2000 must first log in as an Administrator
(computer system administrator) to install programs.
See ArcSoft PhotoStudio (p. 81) for details on how to install ArcSoft
PhotoStudio.
Items to Prepare
• Your camera and computer
• Canon Digital Camera Solution Disk
• Interface cable supplied with the camera
Installation Procedures
1
Confirm that the camera is NOT connected to
the computer.
If it is, disconnect the cable. The software cannot
be properly installed if the camera is connected to
the computer at the start.
2
Close any programs that are running.
Platform – Preparations