Table of Contents
Advertisement
Installation and Maintenance
3.5 DIN Rail Mounting (Optional)
1. Please use the accompanying DIN rail kit to mount your computer to a
standard DIN rail.
2. Place the main unit upside down on a flat surface and locate the 8 screw
holes on the bottom cover.
3. As the figure shown below, align the screw holes of the DIN rail bracket with
the ones of the main unit. Use the screwdriver to secure the bracket to the
main unit with the accompanying screws.
4. You can mount the BOX PC on a DIN rail in the horizontal or vertical
direction.
5. Fasten a pair of DIN rail clips to the DIN rail bracket which was attached to
the main unit. Please refer to the following figures for horizontal and vertical
orientation mounting.
- 39 -
Advertisement
Table of Contents
