3.1 CPU and Memory Module Installation
FPC-7500 / FPC-7502 is designed to be modular, slim and lightweight for easier
maintenance. The following sections describe simple hardware installations.
3.1.1 Removing Top Cover
1. Locate the six screws which secure the top cover.
2. Use a screwdriver to remove the top cover screws. First unscrew the four
screws in each corner, and then the two screws in the middle of the two
sides. Keep the screws safely for later use. (Note: Remember to first
secure the two screws in the middle and then the two sides when you
are to install the top cover.)
3. Slightly pull the top cover upward.
Installation and Maintenance
- 30 -
Thermal Lump
of PCH & CPU