Installing The Outer Rails To The Rack - Bosch DIVAR IP 7000 1U Installation Manual

18 en | Rack installation
4.3.4

Installing the outer rails to the rack

Outer rails attach to the rack and hold the chassis in place. The outer rails extend between 30
inches and 33 inches.
To install the outer rails to the rack
1.
2.
3.
4.
See also:
–
2014.12 | V3 | DOC
Attach the longer section of the outer rail to the outside of the shorter section of the
outer rail. You must align the pins with the slides. Both ends of the outer rail must face
the same direction in order to be secured to the rack.
Adjust both sections of the outer rail to the proper length so that the rail fits snugly
within the rack.
Secure the longer section of the outer rail to the front of the rack with two M5 screws
and the shorter section to the rear side of the rack with two M5 screws.
Repeat steps for the remaining outer rail.
Assembling the outer rails, page 17
Installation Manual
DIVAR IP 7000 1U
Bosch Sicherheitssysteme GmbH