12
en | System overview
–
–
2.3.3
Power supply LEDs and overheat indicators
This chassis provides several options which may include hot-swappable, cold-swappable, and
redundant power supplies. Some power supplies include an LED in the rear with the following
definitions:
Power supply LEDs
Solid green
Solid amber
2014.12 | V3 | DOC
HDD: A flashing LED indicates IDE channel activity in the SAS/SATA drive, SCSI
drive, and/or DVD-ROM drive activity.
Power: Indicates power is being supplied to the system's power supply units.
This LED should normally be illuminated when the system is operating.
Power supply is on.
The power supply is plugged in and turned off, or the
system is off but in an abnormal state.
Installation Manual
DIVAR IP 7000 1U
Bosch Sicherheitssysteme GmbH