Table of Contents
Advertisement
2. Insert the key blade in the lock cylinder and
unlock the door.
3. Refit the plastic cover after unlocking.
NOTE
When the driver's door is unlocked using the
key blade and is opened, the alarm is trig-
gered. It is switched off by inserting the PCC
in the ignition switch, see page 68.
2
Key memory
– driver's seat and door
mirrors
PCC memory function
If several people each with a PCC approach the
car, then the settings for seat and mirrors are
implemented for the person who opens the
driver's door.
After the driver's door has been opened by
person A with PCC-A, but person B with PCC-
B shall drive, the settings can be changed in
three ways:
•
Standing by the driver's door, or sitting
behind the steering wheel, person B
2
Only in combination with power driver's seat and power mirrors.
presses their PCC's unlock button, see
page 49.
•
Select one of three possible memories for
seat adjustment with seat button 1-3, see
page 84.
•
Adjust seat and mirrors manually, see
page 84 and 103.
Lock settings
The Keyless function can be adapted by indi-
cating in the menu system MY CAR which
doors shall be unlocked, under
Lock settings
Keyless entry
select between
All doors unlock
Doors on same side
and
Both front doors
For a description of the menu system, see
page 142.
02 Locks and alarm
Antenna location
Car settings
- there
,
Any door
,
The keyless system has a number of integrated
.
antennae located around the car:
Rear bumper, centre, inside
Door handle, left rear
Roof, centre above rear seat
Cargo area, central and furthest in under
the floor
Door handle, right rear
Centre console, under the rear section
Centre console, under the front section.
*
Option/accessory, for more information, see Introduction.
Keyless drive*
02
``
59
Advertisement
Table of Contents
