Table of Contents
Advertisement
05 Infotainment system
TV*
Save the available TV channels as
presets
If the car has been moved within the country,
for example, from one city to another, it is not
certain that the presets are available at the new
location as the frequency range may have
changed. In which case, carry out another scan
and save a new preset list.
1. Press TV mode on OK/MENU.
2. Turn TUNE to
TV menu
MENU.
3. Turn TUNE to
Autostore
MENU.
> An automatic scan for available TV
05
channels starts, this scan takes a little
while. During this time the figure for
each channel found and added as a pre-
set is shown. When the scan is com-
plete a message is shown and the pic-
ture is shown. A preset list (max. 30 pre-
sets) has now been created and is avail-
able. To change channel, see
page 242.
Scanning the TV channels
This function automatically scans through the
frequency range for all channels available in the
area where you are. When a channel is found,
it is shown for approx. 10 seconds before
scanning is resumed. Scanning is stopped with
*
244
Option/accessory, for more information, see Introduction.
EXIT, then the channel that you just watched
continues to be shown. Scanning does not
affect the preset list.
Activate scanning in TV mode under
Scan.
Teletext
It is possible to read Teletext. Follow these
steps:
1. Press the
and press OK/
trol.
2. Enter the page number (3 digits) with the
and press OK/
number keys (0-9) to select page.
> The page is shown automatically.
Enter new page number, or press the remote
control buttons
Return to TV screen with EXIT or by pressing
the
It is also possible to control the teletext with the
coloured buttons on the remote control.
Information about the current
programme
Press the INFO button in order to display the
information about the current programme, the
next programme and its start time. If the
INFO button is pressed once more then addi-
tional information on the current programme
TV menu
button on the remote con-
/
to go to the next page.
button on the remote control.
can sometimes be displayed, such as start and
end times and a brief description of the current
programme. For more information on the
INFO button, see page 222.
To return to the TV picture, wait several sec-
onds or press EXIT.
Picture settings
The settings for brightness and contrast can be
adjusted. For more information, see page 235.
The reception is lost
If the reception for the TV channel that is being
shown disappears then the picture will freeze.
Shortly after this a message appears informing
that the reception has been lost for the current
TV channel, and a new search for the channel
continues. When the reception returns the dis-
play of the TV channel starts immediately. It is
possible to change channel at any time when
the message is shown.
Reception lost, searching
If the message
shown then this is because the system has
detected that there is no reception for all TV
channels. One possible reason may be that a
border has been crossed and that the system
is set to the wrong country. In which case,
change to the right country in accordance
with "Searching TV channels/Preset list", see
page 243.
is
Advertisement
Table of Contents
