Advertisement
Water Tech Industries Residential REIONATOR ™
LIMITED LIFETIME WARRANTY
Applicable to REIONATOR
RC32-TM, RC40-TM, RC48-TM, RC64-TM, RC80-TM
Water Tech Industries (WTI) hereby warrants said equipment, only to the original purchaser at the original
installation location.
THIS WARRANTY PERIOD BEGINS at the time of initial installation and use. The warranty becomes valid upon
registration of the equipment.
LIMITED LIFETIME WARRANTY ON CONDITIONER AND BRINE TANK – Water Tech Industries will replace or re-
pair (at WTI option) any conditioner tank that becomes unusable because of leakage, corrosion or rupture.
All internal mechanical components are warranted for a period of fi ve years from date of installation.
LIMITED LIFETIME WARRANTY ON RESIN – The REIONATOR has been equipped with the highest quality NSF
certifi ed water treatment media. If, upon factory inspection, the resin is found to be defective, Water Tech
Industries will furnish replacement resin. The resin warranty does not cover resins subjected to water con-
taining greater than 3.0-ppm of free chlorine or chloramines or containing greater than 1.0-ppm total Iron
and/or Manganese. Resin which has been fouled by iron, manganese, organics (or other contaminants not
designed for treatment by the REIONATOR) is not covered.
LIMITED LIFETIME WARRANTY ON CONTROL VALVE - The REIONATOR has been equipped with the highest
quality water conditioning control valves available. If, upon factory inspection, the control valve body or PC
board is found to be defective, WaterTech Industries will furnish repair or replacement (at WTI option) of
the control valve body and/or the PC board. All internal mechanical components are warranted for a period
of fi ve years from the date of installation
EXCLUSIONS AND LIMITATION OF LIABILITY – Water Tech Industries' liability for special, incidental, or
consequential damages is expressly disclaimed. In no event shall Water Tech Industries' liability exceed
the obligation of repairing or replacing any part that becomes defective under valid warranty coverage as
described above. Cosmetic damage that does not affect the process functionality of the equipment is not
covered. Water Tech Industries makes every effort to ensure that all illustrations and specifi cations are
correct. However, these do not imply a warranty that the product is merchantable or fi t for a particular
purpose, or that the product may not vary from the illustrations and specifi cations. The warranty contained
herein is in lieu of all other warranties, expressed or inferred, including any implied warranty of fi tness
for a particular purpose. Labor and transportation costs incidental to the delivery or replacement of parts
other than WTI factory repairs are not covered under this warranty. In the event of a warranty replacement
or repair, WTI will cover the cost of shipping the covered components. This warranty expressly excludes any
system which has been damaged by accident, fi re, fl ood, Act of God, abuse, neglect, freezing, excessive
temperature (below 40° F or above 110° F.), inappropriate pressure (below 20psi or above 100psi), misuse,
alteration, product identifi cation tampering, misapplication, installation or operation not consistent with
WTI instructions and installation outside of applicable plumbing codes and local regulations. Fulfi llment
of the warranty coverage by WTI is contingent on proper execution of the procedures set forth in the WTI
Warranty RMA policy. No person or representative is authorized to assume for Water Tech Industries any
liability on its behalf, or in its name, except to refer the purchaser to this warranty. This warranty gives you
specifi c legal rights, you may also have other rights which vary from state to state.
WHAT MUST YOU DO TO OBTAIN WARRANTY SERVICE - The warranty registration card must be fi lled out
completely and returned to Water Tech Industries within thirty days of installation to validate the REION-
ATOR Limited Lifetime Warranty. Units that have not been registered will be covered under the Standard
Product Warranty rather than the Limited Lifetime Warranty. Repair work should be performed by an autho-
rized Water Tech Dealer. In the event that authorized dealer service is not available, defective components
may be returned directly to Water Tech Industries for warranty service. The registered owner must return
the defective component, freight prepaid, with proof-of-purchase, within the applicable warranty period.
P: 888-254-8412 • F: 503-261-9118 • 13110-3 NE Airport Way, Portland, OR 97230 • watertech.com
R 10/12/07
™
Classic Models:
Care and Use Guide
REIONATOR
Classic Series
™
with Triton Electronic Control Valve
WQA Gold Seal certifi ed to NSF/ANSI Standards 42 and
44 for meeting or exceeding industry standards of
aesthetic chlorine reduction and softening effi ciency.
Advertisement
Table of Contents
Related Manuals for Water Tech REIONATOR Classic Series
Summary of Contents for Water Tech REIONATOR Classic Series
- Page 1 LIMITED LIFETIME WARRANTY ON RESIN – The REIONATOR has been equipped with the highest quality NSF certifi ed water treatment media. If, upon factory inspection, the resin is found to be defective, Water Tech Industries will furnish replacement resin. The resin warranty does not cover resins subjected to water con- taining greater than 3.0-ppm of free chlorine or chloramines or containing greater than 1.0-ppm total Iron...
-
Page 2: Specifications
Customer knows where to purchase regenerant salt or potassium chloride As with any appliance, proper operation and maintenance is required to ensure trou- ble-free operation. Please consult your local authorized Water Tech dealer for service. Customer knows how often to check regenerant salt/potassium level... -
Page 3: Maintenance
Specifi cations Maintenance Water Tech recommends the use of Potassium Chloride (KCl) as a regenerant salt. This manual is applicable to one of the following model numbers: RC32-TM, RC40-TM, RC48-TM, RC64-TM, RC80-TM Softening Effi ciency Softening Capacity Max. Recommended With minimal care, your system is designed to serve you for many years. While con-... - Page 4 • DO initiate a regeneration manually if high water usage is expected due to guests, heavy laundry or other reasons. FIGURE 2 FIGURE 1 • DO contact your Water Tech Dealer if you have any questions about the operation of your system or water quality issues. BYPASS OPERATION POSITION NORMAL OPERATION POSITION •...
-
Page 5: Bypass Valve Operation
Bypass Valve Operation Parts List The bypass valve is typically used to isolate the control valve from the plumbing Triton Control system’s water pressure in order to perform control valve repairs or maintenance. The Valve 1" full fl ow bypass valve incorporates four positions including a diagnostic position that allows service personnel to work on a pressurized system while still providing untreat- ed bypass water to the facility or residence. -
Page 6: Plumbing Connection
Plumbing Connection Set Time of Day / Power Loss The user can also set the time of day. Time of day should only need to be set after Typical Plumbing Installation extended power outages or when daylight saving time begins or ends. If a power outage lasting longer than two hours occurs, the time of day will fl... -
Page 7: Drain Line Connection
Also, when the system is in service and if water is fl owing through the system, the word “Softening” fl ashes on the display. If the unit says “Filtering” instead of “Soften- ing”, it must be reprogrammed. Contact an authorized Water Tech dealer. REGENERATION MODE:... -
Page 8: Starting Up The System
Starting Up the System Starting Up the System Flushing, Conditioning and Sanitizing Step 3 continued: Once the valve has completed the “Brine Fill” cycle it will automatically re- Did you connect the drain line securely to the valve? turn to service. In step 5 you will set the valve to “Regen Today” so that it will STOP regen tonight at the specifi...