Set Default Routing Method; Gps Information - Chrysler MEDIA CENTER 730N RHR Owner's Manual

172
From the Navigation Main Menu touch NAV Settings
and then select either mi/ft or km/m.

Set Default Routing Method

Mark or unmark route parameters and then touch the
SAVE soft-key (not shown) to confirm the changes. Press
the NAV hard-key to cancel without change.
NOTE: Avoiding freeways, toll roads, tunnels or ferries
may result in very long routes.

GPS Information

The GPS Information menu displays Current Location,
Coordinates in degrees, minutes and seconds (touch the
DECIMAL soft-key to switch to Decimal degrees), num-
ber of used satellites, a map of the calculated position,
and elevation.