Table of Contents
Advertisement
DS-2000D(GB)
FUNCTION SETTING (Continued)
• ENGLISH
• SPANISH
• SPDIF/OFF: No signal is output from
• SPDIF/RAW: Select this when the
• SPDIF/PCM: Select this when the
• ON
• OFF
Start the screen saver, the screen saver
image appears when the unit stops or
the image is frozen for a few minutes.
This saver can keep the screen from
being damaged.
• ON: Start the screen saver.
• OFF: Remove the screen saver.
Downloaded From Disc-Player.com Daewoo Manuals
0.8.28 5:6 PM
˘ ` 29
OSD LANGUAGE
The OSD is in English.
The OSD is in Spanish.
SPDIF OUTPUT
the coaxial or optical port.
DVD player is connected with a power
amplifier through optical or coaxial
port, refer to page 12. When a Dolby
Digital DVD, DTS DVD or MPEG
DVD is played, the coaxial or optical
port will output in the corresponding
digital(Source code) format. The power
amplifier to be connected must have
Dolby Digital, DTS and MPEG
decoding.
DVD player is connected with a 2-
channel digital mode or stereo
amplifier (refer to page 12 for the
connection). When a Dolby Digital or
MPEG DVD is played, the optical or
coaxial port will output in PCM 2-
channel format.
CAPTIONS
The hidden subtitle is shown.
The hidden subtitle is turned off.
SCREEN SAVER
DOLBY DIGITAL SETUP
The setting structure is :
- -
DOLBY DIGITAL SETUP PAGE
COMPRESSION
>> LINE OUT
STEREO
DUAL MONO
>>
LEFT MONO
RIGHT MONO
MIXED MONO
DYNAMIC RNG
FRONT SPEAKER >>
STEREO Lt/Rt
STEREO
MAIN PAGE
COMPRESSION
• LINE OUT: Compress input signals
linearly.
DUAL MONO
There is the output mode of the L and
R signals of the set audio output. If it is
set to "MIXED MONO", the function
only works when the DVD being played
is 5.1-channel.
DYNAMIC RNG (RANGE)
When the compression mode is set to
"LINE OUT", this is selected to adjust
linear compression rate to obtain the
different compression results of the
signals.
FRONT SPEAKER
• STEREO Lt/Rt
Select this when you play a disc
with Dolby Pro Logic stereo, the disc
signals can be decoded by the unit and
reproduce realistic theatre effects in
your room.
• STEREO
Select this, the audio output is
ordinary stereo signals.
- -
• 29 •
Advertisement
Table of Contents
