Table of Contents
Advertisement
DS-2000D(GB)
FUNCTION SETTING (Continued)
3.Exit from menus.
Using direction buttons go to
" MAIN PAGE" menu,
then press
The screen shows.
• To select "GENERAL SETUP" menu,
press
GENERAL SETUP
The setting structure is as follows:
TV DISPLAY
SCART FORMAT
TV TYPE
ANGLE MARK
OSD LANGUAGE >> ENGLISH
SPDIF OUTPUT
CAPTIONS
SCREEN SAVER
MAIN PAGE
TV DISPLAY
1. 4:3/PS
This is selected when the unit is
connected with a normal TV.
Wide- screen images are shown on the
screen, but with some parts cut
automatically.
• 28 •
Downloaded From Disc-Player.com Daewoo Manuals
0.8.28 5:6 PM
˘ ` 28
.
SETUP MENU--MAIN PAGE
GENERAL SETUP
DOLBY DIGITAL SETUP
PASSWORD SETUP
PREFERENCES
EXIT SETUP
, then press
.
>> 4:3 / PS
4:3 / LB
16:9 WIDE
>> RGB OUTPUT
YC SIGNAL
COMPOSITE
>> PAL
AUTO
NTSC
>> ON
OFF
SPANISH
>> SPDIF OFF
SPDIF/RAW
SPDIF/PCM
>> ON
OFF
>> ON
OFF
2. 4:3/LB (LETTER BOX)
This is selected when the unit is
connected with a normal TV. Wide-
screen images are shown on the screen,
with black belt on the top and bottom.
3. 16:9 WIDE
This is selected when the unit is
connected with a wide-screen TV.
SCART FORMAT
Achieving the clearer and higher definition
picture than the normal composite output can
be done by selecting RGB. If you want to see
the picture in RGB, choose RGB and connect
to the TV set using SCART connector. To
make correct connection, refer to connections
page for connection to a TV. (If you want to
see the picture in S-Video, choose YC Signal
and connect to the TV set using S-Video cord.)
TV TYPE
You may select according to the colour
system of the TV to be connected.
• Select "PAL"for a PAL TV.
• Select"AUTO"for a multi-system TV.
• Select"NTSC"for a NTSC TV.
ANGLE MARK
This only works when there is an angle
mark on the disc.
• Select"ON",the screen shows the mark
when playing a DVD.
• Select "OFF",the mark is not shown.
Advertisement
Table of Contents
