Table of Contents
Advertisement
3.
Download "appcode.crams" file.
4.
Choose "Flash" mode entering standby status for writing firmware
5.
Turn on TV set.
6.
"Bytes Bar" will showed on the screen in few seconds indicating firmware was downloading.
7.
The download process will take about 4 Minutes. It won't change the original code when download process
intercepted. Once download process was finished system have to take at least 30 seconds updating new
firmware. Please make sure power was supplied without interruption; otherwise system will shut down.
8.
System will restart automatically after finishing writing process.
ViewSonic Corporation
19
Confidential - Do Not Copy
N4261w-1M
Advertisement
Table of Contents
