Download Print this page

Samsung 4000 User Manual

Series 4 series 5
Hide thumbs Also See for 4000:

Advertisement

Quick Links

LED TV
user manual
Transportation to and from the Service Center is the responsibility of
Figures and illustrations in this User Manual are provided for reference
the purchaser. Conditions covered are limited only to manufacturing
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
defects in material or workmanship, and only those encountered
Important Warranty Information Regarding
in normal use of the product. Excluded, but not limited to, are
any originally specified provisions for, in-home or on-site services,
Television Format Viewing
minimum or maximum repair times, exchanges or replacements,
accessories, options, upgrades, or consumables.
See the warranty card for more information on warranty
terms.
For the location of a SAMSUNG Authorized Service Center, please
call toll-free:
Wide screen format LED Displays (16:9, the aspect ratio of the
–– In the United States : 1-800-SAMSUNG (1-800-726-7864)
screen width to height) are primarily designed to view wide screen
format full-motion video. The images displayed on them should
–– In Canada : 1-800-SAMSUNG
primarily be in the wide screen 16:9 ratio format, or expanded to
Still image warning
fill the screen if your model offers this feature and the images are
constantly moving. Displaying stationary graphics and images on
Avoid displaying still images (such as jpeg picture files) or still
screen, such as the dark sidebars on non- expanded standard
image elements (such as TV channel logos, TV shows or movies
format television video and programming, should be limited to no
in panorama or 4:3 format, stock or news scroll bars, etc.) on the
more than 5% of the total television viewing per week. Additionally,
screen. The constant display of still pictures can cause ghosting or
viewing other stationary images and text such as stock market
image burn-in (image retention) on the LED screen, which will affect
reports, video game displays, station logos, web sites or computer
image quality. To reduce the risk of this effect, please follow the
graphics and patterns, should be limited as described above for
recommendations below:
all televisions. Displaying stationary images that exceed the above
• Avoid displaying the same TV channel for long periods.
guidelines can cause uneven aging of LED Displays that leave
• Always try to display any image in full screen mode. Use the TV's
subtle, but permanent burned-in ghost images in the LED picture.
Picture Options menu to select the optimal screen size.
To avoid this, vary the programming and images, and primarily
• Reduce brightness and contrast values to the minimum required
display full screen moving images, not stationary patterns or dark
to achieve the desired picture quality. Values that exceed the
bars. On LED models that offer picture sizing features, use these
minimum may speed up the burn-in process.
controls to view different formats as a full screen picture. Be careful
• Frequently use all TV features designed to reduce image retention
in the selection and duration of television formats you use for
and screen burn-in. Refer to proper user manual section for
viewing. Uneven LED aging as a result of format selection and use,
details.
as well as burned-in images, are not covered by your Samsung
limited warranty.
Contact SAMSUNG WORLDWIDE
• SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED
WARRANTY STATEMENT
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Subject to the requirements, conditions, exclusions and limitations
of the original Limited Warranty supplied with Samsung Electronics
Country
CANADA
(SAMSUNG) products, and the requirements, conditions, exclusions
Samsung Electronics
and limitations contained herein, SAMSUNG will additionally
Canada Inc., Customer
provide Warranty Repair Service in the United States on SAMSUNG
Address
Service 55 Standish Court
products purchased in Canada, and in Canada on SAMSUNG
Mississauga, Ontario L5R
4B2 Canada
products purchased in the United States, for the warranty period
originally specified, and to the Original Purchaser only.
Customer Care
1-800-SAMSUNG(726-7864)
Center 
The above described warranty repairs must be performed by a
www.samsung.com/ca
SAMSUNG Authorized Service Center. Along with this Statement,
(English)
the Original Limited Warranty Statement and a dated Bill of Sale
Web Site
as Proof of Purchase must be presented to the Service Center.
www.samsung.com/ca_fr
(French)
© 2012 Samsung Electronics Co., Ltd. All rights reserved.
BN68-04499A-02
- 1 -
BN68-04499A
To add channels to the Added Channels list, follow these steps:
If you select Everyday or Every Week, the date you
select in the Date field becomes the start date for your
1. Select one or more channels in the All Channels list using the
scheduled viewing. For Everyday, the TV will turn on
▲/▼ buttons and the Yellow Select button on your remote.
every day, at the time you selected, starting from that
2. Press the
TOOLS
button on your remote. The Tools menu
date. For Everyweek, the TV will turn on every week,
appears.
on the same day of the week as the start date you
3. Select Add in the Tools menu, and then press the ENTERE
selected, at the time you selected, from that day on. If
button.
you select Once, the TV will turn on once, on the date
and time you selected.
All deleted channels will be shown on the All Channels list.
You add channels back to the Added Channels list on the
5. Press the ENTERE button on your remote when done.
All Channels list.
Only Added Channels can be scheduled.
A gray-colored channel indicates the channel has been
Scheduled programs and channels are displayed in the
deleted from the Added Channels list.
Programmed List.
The Add menu option only appears for deleted channels.
When you select a digital channel, press the ► button to
■ Add to Favorite/Delete from Favorite: Lets you add channels
view the digital program list. If you highlight a program in
to and delete channels from your Favorites list.
the list, and then press the ENTERE(Schedule) button,
you set Timer Viewing for that program directly.
To add channels to the Favorites list, follow these steps:
■ Select All: Select all the channels in the displayed channel list.
1. Select one or more channels in the All Channels list using the
▲/▼ buttons and the Yellow Select button on your remote.
■ Deselect All: Deselect all the selected displayed channels.
You can only select Deselect All when one or more
2. Press the
TOOLS
button on your remote. The Tools menu
channels are selected.
appears.
■ Channel Name Edit: Analog channels only. Lets you assign a
3. Select Add to Favorite in the Tools menu, and then press the
name of up to five characters to an analog channel. For example,
ENTERE button.
Hist, Food, Golf, etc. This makes it easier to find and select a
channel .
To delete channels from the Favorites list, follow these steps:
■ Auto Program: See Auto Program under Memorizing Channels.
1. Select one or more channels in the Favorite Channels list
using the ▲/▼ buttons and the Yellow Select button on your
Programmed List (on the Channel List Screen)
remote.
The Programmed list displays the channels and programs you
2. Press the
TOOLS
button on your remote. The Tools menu
have scheduled for viewing using the Time Viewing function. You
appears.
can view, modify, or delete a show you have scheduled using the
3. Select Delete from Favorite in the Tools menu, and then
functions on the Programmed List screen Tools menu.
press the ENTERE button.
Programmed List Screen Tools Menu
■ Timer Viewing: You can schedule a channel to be displayed
automatically at a set time, even when you are watching another
■ Change Info: Change the scheduling information for a show or
channel. You must set the current time first in the Time > Clock
channel you have scheduled.
function to use Time Viewing.
To change the information, follow these steps:
To schedule a channel, follow these steps:
1. Select the Programmed List icon on the left side of the
1. Select a channel in the Added Channels list using the ▲/▼
Channel List screen, and then press the ENTERE button.
buttons and the Yellow Select button on your remote.
2. On the Programmed List screen, select the show or channel
2. Press the
TOOLS
button on your remote. The Tools menu
entry you want to change, and then press the
appears.
The Tools Menu appears.
3. Select Time Viewing in the Tools menu, and then press the
3. Select Change Info, and then press the ENTERE button.
ENTERE button. The Time Viewing screen appears.
The Time Viewing screen appears.
Timer Viewing
4. Use the ◄/► buttons to move from entry field to entry field
and the ▲/▼ buttons to change the entries. Where numbers
Antenna
Channel
Repeat
are displayed, you can also enter numbers directly using the
number keypad on your remote.
DTV Air
6-1
Once
5. Press the ENTERE button when done.
Date
Start Time
■ Cancel Schedules: Cancel a show or channel you have
01-01-2012
12 : 01 am
scheduled.
L Move
U Adjust
E Enter
R Return
To cancel a scheduled show or channel, follow these steps:
4. Use the ◄/► buttons to move from entry field to entry field
1. Select the Programmed List icon on the left side of the
and the ▲/▼ buttons to change the entries. Where numbers
Channel List screen, and then press the ENTERE button.
are displayed, you can also enter numbers directly using the
2. On the Programmed List screen, select the show or channel
number keypad on your remote.
entry you want to cancel, and then press the
The Tools Menu appears.
3. Select Cancel Schedules, and then press the ENTERE
button. The Cancel Schedule screen appears.
4. Select OK, and then press the ENTERE button.
- 5 -
Advanced Settings
The On Screen Menus
Available in Standard and Movie mode only.
Your TV has two kinds of menus, the Main menu and the various
Compared to previous models, new Samsung TVs offer a more
Tools menus. The Main menu gives you access to most or all of
precise picture with more precise controls.
the menu options available on your TV. The Tools menus display
When your TV is connected to a PC, you can only make
a selected number of frequently used menu options that change
changes to Gamma and White Balance.
depending on the screen you are viewing. A Tools menu symbol
■ Color Space (Auto / Native): Auto automatically matches the
(T) in the lower right side of the screen indicates that a Tools menu
is available.
range of colors available to create pictures to the color range of
the video source. Native provides a color range wider than the
The Main menu has seven primary categories:
color range of the video source.
y Picture
y Input
■ White Balance: Adjusts the color temperature of the picture so
that white objects look white (instead of, for example, slightly
y Sound
y Application
pink or slightly yellow) and the overall color of the picture looks
y Channel
y Support
natural.
y Setup
R-Offset / G-Offset / B-Offset: Adjusts each color's (red,
green, blue) darkness.
To view the Main menu, press the
MENU
button on your remote. To
R-Gain / G-Gain / B-Gain: Adjusts each color's (red, green,
view a Tools menu, press the
TOOLS
button on your remote.
blue) brightness.
Reset: Resets the White Balance to it's default settings.
The menu options that appear in the Main menu depend
on the Source you have selected. For example, if you have
■ Gamma: Adjusts the primary color intensity.
selected the HDMI source, the Channel category will not
■ Dynamic Contrast (Off / Low / Medium / High): Adjusts the
appear. To see the Channel category, you must first select TV
screen contrast.
in the Source List.
■ Black Tone (Off / Dark / Darker / Darkest): Selects the black
level to adjust the screen depth. Darker settings make blacks
The Menu options are presented below, arranged by Main menu
t )
look darker.
categories. A Tools button symbol
(
next to an option
name indicates the option is also available in one of the Tools
■ Flesh Tone: Adjusts the amount of red in skin tones.
menus.
■ Motion Lighting (Off / On): When on, the TV automatically
adjusts the brightness of the screen in response to the
Picture Menu
brightness of the room. In bright light, the screen brightens. In
dim light, the screen dims.
Available in Standard mode only.
Mode t
Picture Options
Select your preferred picture mode.
When the TV is connected to a PC, you can only make
When your TV is connected to a PC, you can only select
changes to the Color Tone, Size and HDMI Black Level.
Entertain and Standard
.
■ Color Tone (Cool / Standard / Warm1 / Warm2): Cool makes
■ Dynamic: Brightens the screen. Suitable for a bright room.
the picture bluer (cooler). Warm 1 and Warm 2 make the picture
redder (warmer).
■ Standard: Suitable for a normal.
Warm1 and Warm2 are deactivated when the picture
■ Movie: Darkens the screen, making it less glary. Suitable for
mode is set to Dynamic.
watching movies in a darkened room.
■ Size: Set the size and aspect ratio of the picture on the screen.
■ Entertain: Sharpens the picture. Suitable for games.
Your cable box or satellite receiver may have its own set of
Only available when the TV is connected to a PC.
screen sizes as well. However, we highly recommend you use
the TVs 16:9 mode most of the time.
Backlight / Contrast / Brightness / Sharpness /
16:9: Sets the picture to the 16:9 wide screen format.
Color / Tint (G/R)
Zoom1: Provides moderate magnification of the picture. Sides,
top, and bottom are cut off.
■ Backlight: Adjusts the brightness of the screen by adjusting the
Zoom2: Provides larger magnification of the picture. Sides, top,
brightness of the individual pixels.
and bottom are cut off.
■ Contrast: Increases or decreases the contrast between dark and
Wide Fit: Enlarges the aspect ratio of the picture so the picture
light areas of the picture.
fits the entire screen.
U.S.A.
■ Brightness: Adjusts the brightness of the screen. Not as
4:3: Sets the picture to the old, 4:3 format and puts black or gray
Samsung Electronics
effective as Backlight.
borders on the right and left of the picture.
America, Inc.
Do not watch your TV in the 4:3 format for a long time.
■ Sharpness: Sharpens or dulls the edges of objects.
85 Challenger Road
Traces of borders displayed on the left, right and center of
■ Color: Adjusts the color saturation. The higher the Color setting,
Ridgefield Park, NJ
the screen may cause image retention (screen burn) which
the more intense the color. Low settings remove color and the
07660-2112
is not covered by the warranty.
picture becomes black, white and gray.
Screen Fit: Displays the full image without any cut-off when
■ Tint: Adjusts the amount of green and red in the picture. As you
your TV is inputting HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) HD signals.
increase the amount of green, the amount of red decreases and
vice versa.
HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
(1920x1080) or 720p (1280x720) resolution.
www.samsung.com/us
When the TV is connected to a PC, you can only make
You can adjust and store settings for each external device you
changes to Backlight, Contrast, Brightness, and
have connected to an input on the TV. Picture Sizes available
Sharpness.
by Input Source are listed below:
- 2 -
■ Information: Display the information for a show or channel you
To set the clock, follow these steps:
have scheduled. You can also change the schedule Information.
1. Select Setup >Time > Clock.
1. Select the Programmed List icon on the left side of the
2. Press ENTERE and select Auto or Manual, and then press
Channel List screen, and then press the ENTERE button.
ENTERE again.
2. On the Programmed List screen, select the show or channel
If you selected Auto:
entry you want information for, and then press the
TOOLS
The TV will automatically download the correct time from a
button. The Tools Menu appears.
digital channel.
3. Select Information, and then press the ENTERE button.
• Select Time Zone, and then press the ENTERE button.
The Time Viewing Information screen appears.
Use the▲/▼ buttons to select your Time Zone, and then
4. Select Change Info and press the ENTERE button
press ENTERE.
to change information, or select Close and press the
• Select DST (Daylight Savings Time), and then press
ENTERE button to close the Information screen.
ENTERE. Select On if you want to turn the DST
■ Select All / Deselect All: You can select or deselect all
adjustment on and off manually. Select Off to turn off the
channels in the channel list.
DST adjustment. Select Auto if you want the TV to adjust
to DST automatically. Press ENTERE when done.
❑ Other Channel Menu Functions
Channel Mode (Added Channels/Favorite
If you selected Manual:
Channels)
The Clock Set screen appears. Use the ▲/▼ buttons to
Lets you select the channel list displayed when you press the
change the values in each field or use the number buttons to
<CH> (Channel) button on your remote. For example, if you
enter the values directly. Use the ◄/► buttons to move from
select Favorite Channels, you will only see Favorite channels when
field to field. When done with all the fields, press ENTERE.
you press the <CH> button.
Fine Tune
■ Sleep Timer t
Analog channels only.
Automatically shuts off the TV after a preset period of time. (30,
If the reception is clear, you do not have to fine tune the channel,
60, 90, 120, 150 and 180 minutes).
as this is done automatically during the search and store
To cancel the Sleep Timer, select Off.
operation. If the signal is weak or distorted, fine tune the channel
Timer 1 / Timer 2 / Timer 3
manually.
Turns the TV on and off automatically at times and days you
Select the channel, and then select Fine Tune.
select. You can set three different on/off timer settings.
Fine tuned channels that have been saved are marked with
t
You must set the clock first.
an asterisk "*" on the right-hand side of the channel number
in the channel banner.
■ On Time / Off Time: Set the hour, minute, am/pm, and
To reset fine-tuning, select the channel, select Fine Tune, and
Activate/Inactivate fields for the On Time and Off Time. Use the
◄/► buttons to move from field to field. Use the ▲/▼ buttons
then select Reset on the Fine Tune screen.
to change the values in each field. To activate the timer with
the setting you have chosen, set the Activate/Inactivate field to
Setup Menu
Activate.
■ Volume: Set the desired loudness.
TOOLS
button.
Plug & Play
■ Contents: To select what will be turned on when the timer
setting is activated. You can set the TV to turn on a specific
Lets you re-run the Plug & Play initial setup procedure. For
channel or play back contents such as photo or audio files.
instructions, see your Quick Start Guide.
Use the ◄/► buttons to move to move to the Contents field,
Language
and then press the ENTERE button. The Contents screen
appears. Use the ◄/► buttons to move from field to field. Use
Set the menu language.
the ▲/▼ buttons to change the values in each field.
Choose between English, Español, and Français.
- TV/USB: Select TV or USB. The USB device must be
connected to your TV before you can select USB.
❑ Setting the Time
- Antenna: Displays the current antenna source, Air or Cable.
Time
- Channel: If you have selected TV, select the desired channel.
The time you set will appear when you press the
INFO
- Music/Photo: If you have selected USB, follow these steps to
button.
select a folder containing MP3 (Music) or JPEG (Photo) files on
■ Clock: Set the clock so you can use the various timer features
the USB device:
of the TV.
The maximum displayed number of files, including sub
If you disconnect the power cord, you have to set the
folders, in one folder of USB storage device is 2000.
TOOLS
button.
clock again.
The media may not be playing smoothly when using the
device lower than USB 2.0.
1. Use the ◄/► buttons to move to the field under Music
or the field under Photo, and then press the ENTERE
button. The TV displays a single folder (the Root folder)
and the type or name of the device.
- 6 -
Input Source
ATV, AV, Component (480i, 480p)
DTV (1080i, 1080p), Component (1080i, 1080p),
HDMI (720p, 1080i, 1080p)
■ Digital Noise Filter (Off / Low / Medium / High / Auto) : If the
broadcast signal received by your TV is weak, you can activate
the Digital Noise Filter feature to reduce any static and ghosting
that may appear on the screen.
When the signal is weak, try all the Digital Noise Filter
options until the TV displays the best picture.
■ HDMI Black Level (Normal / Low) : For HDMI signals, select
the black level to adjust the screen depth. Low make blacks look
darker.
Available only in HDMI mode (RGB signals).
■ Film Mode (Off / Auto) : Sets the TV to automatically sense and
process film signals from all sources and adjusts the picture for
optimum quality.
Available in ATV, DTV (interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i / 1080i).
■ LED Motion Plus (Off / On): Removes drag from fast scenes
with a lot of movement to provide a clear picture.
Picture Reset
■ Picture Reset (Reset Picture Mode/Cancel): Resets the
picture settings to their factory defaults.
Sound Menu
Mode t
■ Standard: Selects the normal sound mode.
■ Music: Emphasizes music over voices.
■ Movie: Provides the best sound for movies.
■ Clear Voice: Emphasizes voices over other sounds.
■ Amplify: Increase the intensity of high-frequency sounds to allow
a better listening experience for the hearing impaired.
Equalizer
Available in Standard sound mode only.
■ Balance L/R: Adjusts the balance between the right and left
speaker.
■ 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth
frequencies.
■ Reset: Resets the equalizer to its default settings.
SRS TruSurround HD (On/Off)
Available in Standard sound mode only.
SRS TruSurround HD is a patented SRS technology that solves
the problem of playing 5.1 multichannel content through two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all
multichannel formats.
Preferred Language
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations of a program
into foreign languages).
You can only select a language from among the ones being
broadcast.
2. Press the ENTERE button. A list of folders on the device
appears.
If there are no folders on your device, press the
Yellow select button to select the Root folder, and
then press the
RETURN
button. The Timer screen
re-appears.
3. Use the ▲/▼ buttons to highlight a folder that contains
music or photos, and then press the Yellow select button
to select the folder.
4. Press the
RETURN
button. The Timer screen re-appears.
■ Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun
or Manual. If you select Manual, you can select the days you
want to activate the timer by using the ◄/► buttons to highlight
the day, and then pressing the ENTERE button. To unselect a
day, highlight it, and then press the ENTERE button.
When you finished making all your selections on the Timer screen,
DST and Time Zone function are only available when
press either the ENTERE or
RETURN
button.
the Clock Mode is set to Auto.
❑ Other Features
Program Rating Lock
The Program Rating Lock feature lets you block programs
you've determined are inappropriate for your children based on
Available only when Clock Mode is set to Manual.
the program's ratings. To access the Program Rating Lock
feature and make any changes, you must enter a PIN (personal
identification number). To watch a blocked program, you must also
enter the same PIN.
Program Rating Lock is not available in HDMI or
Component mode.
The default PIN number of a new TV set is "0-0-0-0". You can
set your own PIN using the Change PIN function.
How It Works
When you access the Program Rating Lock Menu functions for
the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN
screen closes and the Program Rating Lock Menu appears. Every
time you access the Program Rating Lock functions, the PIN
screen will appear and you must enter a PIN.
When the Rating Lock screen appears, select Program Rating
Lock, and then press ENTERE. Select On, and then press the
ENTERE key again. Depending on what type of programs or
movies you want to block, select one of the options on the screen,
and then press the ENTERE button. The options are listed below:
■ TV Parental Guidelines: You can block TV programs based
on their ratings. This function allows you to control what your
children are watching.
■ MPAA Rating: You can block movies based on their MPAA
ratings. The Motion Picture Association of America (MPAA) has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for
children.
■ Canadian English: You can block TV programs based on their
Anglophone Canadian ratings.
■ Canadian French: You can block TV programs based on their
French Canadian ratings.
■ Downloadable U.S. Rating: Parental restriction information can
be used while watching DTV channels.
Multi-Track Sound (MTS)
Channel Menu
Picture Size
Analog channels only.
16:9, Zoom1,
■ Mono: Select for channels that are broadcasting in mono or if
Zoom2, 4:3
❑ Memorizing Channels
you are having difficulty receiving a stereo signal.
16:9, Wide Fit,
■ Stereo: Select for channels that are broadcasting in stereo.
When you first set up your TV using Plug & Play, the TV memorized
4:3, Screen Fit
■ SAP: Select to listen to the Separate Audio Program, which is
the channels that were available over the air or through your cable
usually a foreign-language translation.
system and added them to the Channel List. The Antenna and
Depending on the program being broadcast, you can listen to
Auto program functions described below let you re-run the channel
Mono, Stereo or SAP.
memorization function without having to re-run the Plug & Play
procedure.
Auto Volume
Antenna (Air / Cable)
Because each station has its own broadcasting conditions, the
volume may fluctuate each time you change the channel. This
Before your television can memorize the available channels, you
feature automatically adjusts the volume of a channel by lowering
must select your TV's signal source, Air (using an antenna) or Cable.
the sound output when the modulation signal is high or by raising
Select Menu >Channel > Antenna > Air or Cable. After you have
the sound output when the modulation signal is low.
selected the signal source, go on to the Auto Program function.
Selecting the signal source using the Antenna function also
SPDIF Output
determines the signal source the TV is tuned to. For example,
The SPDIF (Sony Philips Digital InterFace) outputs an
if you receive your TV signal over the air, and you select Cable,
uncompressed digital audio signal when you connect the digital
you will see only snow. You must select Air to see a picture.
audio jack on the back of the TV to a digital audio in jack on a
Auto Program
receiver or home theater.
■ Audio Format (PCM/Dolby Digital): You can select the Digital
The Auto Program function memorizes all channels that are
Audio output (SPDIF) format. The available Digital Audio output
available over the air or through your cable system and adds them to
format may differ depending on the input source.
the Channel List.
By connecting the TV to a receiver or home theater with
To start Auto Program, follow these steps:
Dolby Digital and 5.1ch speakers and selecting Dolby
1. Push MENUm → Channel → Auto Program → ENTERE on
Digital, you can maximize your interactive 3D sound
your remote. The Antenna Source screen appears.
experience.
2. On the Antenna Source screen, select the source of your TV
■ Audio Delay: Lets you correct timing mismatches between the
signal.
audio track and the video when you are watching the TV and
listening to digital audio output from the TV through an external
Air
device such as an AV receiver. When you select Audio Delay, a
If your TV is connected to an antenna choose Air, and then press
slider appears. Use the left and right arrow buttons to adjust the
ENTERE. The TV will automatically start memorizing channels.
slider. Press ENTERE when done (0ms ~ 250ms).
Cable
Speaker Settings
If your TV is connected to a cable outlet, choose Cable, and then
■ Speaker Select (External Speaker / TV Speaker)
press ENTERE. Go to Step 3.
If you are listening to the sound track of a broadcast or movie
Auto
through an external receiver, you may hear a sound echo caused
If you choose Auto, and then press
by the difference in decoding speed between the TV's speakers
and the speakers attached to your audio receiver. If this occurs,
automatically select the correct Antenna source. Go to
set the TV to External Speaker.
Step 3.
When you set Speaker Select to External Speaker, the
3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to select
TV's speakers are turned off. You will hear sound through
the type of digital and analog cable systems you have: STD, HRC,
the external speakers only. When you set Speaker Select
or IRC. Most systems are STD (Standard). When done, select
to TV Speaker both the TV's speakers and the external
Start, and then press ENTERE. The TV will start memorizing
speakers are on. You will hear sound through both.
channels.
When Speaker Select is set to External Speaker, the
VOLUME
and
MUTE
buttons will not operate and the
Channel memorization can take up to 45 minutes, depending
sound settings will be limited.
on your cable system.
Memorized channels are added to the Added Channels
If there is no video signal, both the TV's speakers and the
external speakers will be mute.
list. These are the channels you will see when you use the
Channel buttons on your remote.
Sound Reset
Clear Scrambled Channel
■ Reset All: Resets all sound settings to the factory defaults.
This function filters out scrambled channels after Auto Program is
completed. This process may take up to 20~30 minutes.
Press the ENTERE button to stop the Clear Scrambled
Channel.
This function is only available in Cable mode.
- 3 -
Locking/Blocking Programs or Movies
Background Color: Options include Default, White, Black, Red,
Green, Blue, Yellow, Magenta and Cyan. You can change the
You lock or block programs and/or movies in essentially the same
background color of the captions. The default is Black.
way for each option. Each option displays a grid or table. All the
Foreground Opacity: This adjusts the opacity of text. Options
tables have ratings listed on the left. The TV Parental Guidelines
include Default, Transparent, Translucent, Solid and Flashing.
option also has kinds of content listed across the top: ALL: Lock all
Background Opacity: This adjusts the opacity of the caption
TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation
background. Options include Default, Transparent, Translucent,
/ L: Adult Language / D: Sexually Suggestive Dialog.
Solid and Flashing.
To lock/block movies or shows with certain ratings and/or kinds of
Return to Default: This option sets each Size, Font Style,
content, click the square next to the rating and/or under the kind of
Foreground Color, Background Color, Foreground Opacity and
content. A lock appears. To unlock/unblock, click the square again.
Background Opacity to its default.
When you click a low rating, all the ratings above it will also display
Digital Caption Options are available only when you can
locks. You can also Allow All or Lock All. When done, press the
select Default and Service1 ~ Service6 in Caption Mode.
RETURN
button on your remote.
The Foreground and Background cannot be set to the
■ Change PIN: The Change PIN screen will appear. Choose any
same color.
4 digits for your PIN and enter them in Enter New PIN fields.
Re-enter the same 4 digits in Confirm New PIN fields. When the
Melody
Change PIN screen disappears, press the
OK
button. The TV
Set so that a melody plays when the TV is turned on or off.
has memorized your new PIN.
The Melody does not play:
If you forget the PIN, press the remote-control buttons in
the following sequence, which resets the pin to "0-0-0-0" :
x
When no sound is output from the TV because the
POWER
(off) →
MUTE
→ 8 → 2 → 4 →
POWER
(on)
button has been pressed.
x
When no sound is output from the TV because the volume has
Game Mode (On/Off)
been reduced to minimum with the
x
When you connect a game console such as a PlayStation™
When the TV is turned off by Sleep Timer function.
or Xbox™ to your TV, you can enjoy a more realistic gaming
Auto Protection Time
experience by turning on the Game Mode function.
■ Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
Precautions and limitations for game mode:
hours): If the screen remains idle with a still image for a certain
x
Before you disconnect the game console and connect another
period of time you define, the screen saver is activated to prevent
external device, set Game Mode to Off in the setup menu.
the formation of ghost images on the screen.
x
If you display the TV menu in Game Mode, the screen shakes
slightly.
Eco Solution
Game Mode is not available when the input source is set to
■ Energy Saving (Off / Low / Medium / High / Picture Off) :
TV.
This adjust the brightness of the TV in order to reduce power
After connecting the game console, set Game Mode to On.
consumption. If you select Picture Off, the screen is turned
You may notice slightly reduced picture quality.
off, but the sound remains on. Press any button except volume
button to turn on the screen.
Caption
■ Eco Sensor (Off / On)
(On-Screen Text Dialogue)
power savings; the picture settings will automatically adapt to the
light in the room.
■ Caption: You can switch the caption function on or off. If
captions are not available, they will not be displayed on the
If you adjust the Backlight, the Eco Sensor will be set to
screen.
Off.
Min. Backlight: When Eco Sensor is On, the minimum screen
The Caption feature does not work in Component or
brightness can be adjusted manually.
HDMI mode.
If Eco Sensor is On, the display brightness may change
■ Caption Mode: You can select the desired caption mode.
(become slightly darker in most cases) depending on the
Default / CC1~CC4 / Text1~Text4: (analog channels only) The
surrounding light intensity.
Analog Caption function operates in either analog TV channel
■ No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets
mode or when a signal is supplied from an external device to the
how quickly the TV switches to standby mode, if no picture is
TV. (Depending on the broadcasting signal, the Analog Caption
being received.
function may or may not work with digital channels.)
Disabled when the PC is in power saving mode.
Default / Service1~Service6 / CC1~CC4 / Text1~Text4:
■ Auto Power Off (Off / On): The TV will be automatically turned
(Digital channels only) The Digital Captions function works with
off when no user operation is received for 4 hours.
digital channels.
Service1~6 may not be available in digital caption mode
Support Menu
depending on the broadcast.
■ Digital Caption Options: (Digital channels only)
Self Diagnosis
Size: Options include Default, Small, Standard and Large. The
default is Standard.
■ Picture Test: Use to check for picture problems. If the problem
Font Style: Options include Default and Styles 0 to 7. The
appears in the test picture, select Yes and follow the directions
default is Style 0.
on the screen.
Foreground Color: Options include Default, White, Black, Red,
■ Sound Test: Use the built-in melody sound to check for sound
Green, Blue, Yellow, Magenta and Cyan. You can change the
problems. If the problem occurs during the test, select Yes and
color of the letters. The default is White.
follow the directions on the screen.
■ Signal Strength: (Digital channels only) An HD channel's
reception quality is either perfect or the channels are unavailable.
Adjust your antenna to increase signal strength.
- 7 -
❑ Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels
you've scheduled for viewing. Add or delete Favorite channels, add
or delete channels from the Added Channels list, schedule channels
or programs for viewing. Watch a channel by selecting the channel
in the All Channels, Added Channels, or Favorite screen, pressing
the ▲ / ▼ buttons, and then pressing the ENTERE button.
6
Air
6-1
♥ TV #6
7-1
♥ TV #7
8
Air
9
Air
9-1
♥ TV #9
10
Air
10-1
♥ TV #10
11-1
♥ TV #11
Air
'
Zoom
'
Select T Tools ► Next Program
Channel List Screens icons are listed on the left side. Select an
icon using the ▲/▼ buttons to view each list.
All Channels: Shows all currently available channels including
those you deleted from the Added Channels
list.
Added Channels: Shows all Added Channels. These are the
channels that appear when you press the CH button.
Favorite: Shows all favorite channels.
*
Programmed: Shows all channels and programs currently
scheduled using Timer Viewing.
Remote control buttons active on the Channel List screen.
x
Green (Zoom): Enlarges or shrinks a channel number.
x
Yellow (Select): Move the cursor to a channel. Press the Yellow
button to select the channel. A c mark appears. Repeat to select
additional channels. Then, open the Tools menu and apply a
function to the channels you selected.
x
T (Tools): Displays the Channel List Tools menu. (The Tools
menus may differ depending on the situation.)
Display Icons Used in the Channel List Screens
, the TV will
ENTERE
Icons
Meaning
c
A selected channel.
*
A Favorite channel.
)
A reserved program.
(
A program currently being broadcast.
❑ The Channel List Tools Menu t
The Channel List Tools menu contains most of the functions you
can use on the All Channel, Added Channels, and Favorite List
screens. To view, select a list screen, select a channel, and then
press the
TOOLS
button.
■ Add / Delete: Delete a channel from or add a channel to the
Added Channels list.
To delete channels from the Added Channels list, follow these steps:
1. Select one or more channels in the Added Channels list using
the ▲/▼ buttons and the Yellow Select button on your remote.
2. Press the
TOOLS
button on your remote. The Tools menu
appears.
3. Select Delete in the Tools menu, and then press the ENTERE
button.
- 4 -
■ Reset: Reset all settings to the factory defaults.
The PIN input screen appears before the setup screen.
Enter your 4-digit PIN. Change the PIN using the Change
PIN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the
TV.
Contact Samsung
View this information when your TV does not work properly or
POWER
P
when you want to upgrade the software. You can find information
regarding our call centers and how to download products and
software.
Media Play
MUTE
Enjoy photos, music and/or movie files saved on a
VOL –
button.
USB Mass Storage Class (MSC) device.
MEDIA.P
❑ Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music, and/or movie
files to the USB jack on the back of the TV. A pop up window
appears.
3. Press the
MEDIA.P
button on your remote. The Media Play
menu appears.
❑ Using the Media Play Menu
for LED 5000 series
: To enhance your
Media Play
Videos
Change Device
SUM
E Enter R Return
To open Media Play in the Menu, follow these steps:
1. Press the
MENU
button. Then, press the ▲ or ▼ button to
select Application on the left, and then press the ENTERE
button.
2. Press the ▲ or ▼ button to select Media Play (USB), and then
press the ENTERE button.
3. Press the ◄ or ► button to select an icon (Videos, Music,
Photos, Settings), and then press the ENTERE button.
Media Play might not work properly with unlicensed
multimedia files.
Need-to-Know List before using Media Play (USB)
x
The file system supports FAT16, FAT32 and NTFS.
x
Certain types of USB Digital camera and audio devices may not
be compatible with this TV.
x
Media Play only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV's USB
port. USB HDD is not supported.
- 8 -

Advertisement

loading

Summary of Contents for Samsung 4000

  • Page 1 3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to select details. as well as burned-in images, are not covered by your Samsung 16:9: Sets the picture to the 16:9 wide screen format. TV’s speakers are turned off. You will hear sound through A reserved program.
  • Page 2 24/25/30 30Mbps Screen Brightness If you find that the colors on your Samsung TV are correct but just a little too dark or bright, there are some settings *.dat AC3 / A c mark appears to the left of the selected files.

This manual is also suitable for:

4050505050705000