A vivarium should be set up to allow a temperature gradient. T he
heater should be at one end with the sensor in the centre of the
vivarium. T his will allow a Hot area, C ontrolled area and a C old area.
Heater
Controlled
Hotter
Correct temperature reading
The temperature sensor encased in the black sheath is very
accurate. Having set the desired temperature on the thermostat and
positioned the sensor in its required location the temperature of the
air will be controlled accurately at the position of the temperature
sensor.
The temperature nearer the heater (from the sensor position) will
be hotter and further away from the heater it will be cooler.
Please note that when using a thermometer to check the
temperature unless it is in exactly the same position as the
thermostat sensor there will be a discrepancy due to the positioning
of the thermometer.
Warranty
Used in accordance with these instructions this thermostat will give many years of trouble
free service. T he thermostat is guaranteed for five years from the date of purchase against
faulty parts and workmanship. In the unlikely event of a failure, return it to Microclimate
International Ltd together with a receipt or proof of purchase and a brief description of the
fault. If returned within one year there will be no charge, after this time a charge of £5 will
be made for administration and postage. Please enclose a cheque or postal order made
payable to Microclimate International. C ash is also accepted.
No liability is accepted other than for the repair or replacement of a faulty product.
This does not affect your statutory rights.
Microclimate International
Unit 3 Heath Mill Enterprise Park
Heath Mill Road
Wombourne
England
United Kingdom
WV5 8AP
Sensor
Cooler
Tel : 01902 895351
Fax : 01902 897613
Sales@microclimate.co.uk
www.microclimate.co.uk
IMPORTANT -‐ T O ENSURE C ORRECT O PERATION O F Y OUR B 1ME/HT
THERMOSTAT PLEASE READ T HE G UIDE BEFORE C OMMENCING INSTALLATION
B1ME/HT T hermostat
The B1ME/HT T hermostat is designed to give precise microprocessor
controlled temperature of heat sources up to 600 watts. T his may
include heatmats,ceramics, bulbs and other heat sources. T he heat
source must be a minimum of 5 watts.
The B1ME/HT is a dimming thermostat which will control the heat
source precisely by varying the power to the heater. T he thermostat has
a built in day/night sensor which allows a temperature drop during the
night to recreate a realistic microclimate for your pet.
WARNING
DO NOT OVERLOAD YOUR THERMOSTAT BY CONNECTING
HEAT SOURCES WITH OUTPUTS GREATER THAN 600 WATTS.
DAMAGE CAUSED BY MISUSE IS NOT COVERED BY THE WARRANTY.
B1ME/HT
Thermostat
User G uide
PF0078HT A
Need help?
Do you have a question about the B1ME and is the answer not in the manual?
Questions and answers