MICROclimate International HH 6 User Manual

Correct temperature reading
The temperature sensor encased in the black sheath is very accurate.
Having set the desired temperature on the thermostat and positioned
the sensor in its required location the temperature of the air will be
controlled accurately at the position of the temperature sensor.
The temperature nearer the heater (from the sensor position) will be
hotter and further away from the heater it will be cooler.
Please note that when using a thermometer to check the temperature
that unless it is in exactly the same position as the thermostat sensor
there will be a discrepancy due to the positioning of the thermometer.

Warranty

Used in accordance with these instructions this thermostat will give
many years of trouble free service.
The thermostat is guaranteed for five years from the date of purchase
against faulty parts and workmanship. In the unlikely event of a failure,
return it to Microclimate International Ltd together with a receipt or
proof of purchase and brief description of the fault. If returned within
one year there will be no charge, after this time a charge of £5 will be
made for administration and postage. Please enclose a cheque or
postal order made payable to Microclimate International. C ash is also
accepted.
No liability is accepted other than for the repair or replacement of a
faulty product.
This does not affect your statutory rights.
Microclimate International
Unit 3 Heath Mill Enterprise Park
Heath Mill Road
Wombourne
England
United Kingdom
WV5 8AP
Tel : 01902 895351
Fax : 01902 897613
Sales@microclimate.co.uk
www.microclimate.co.uk
IMPORTANT -­‐ T O ENSURE C ORRECT O PERATION O F Y OUR H H 6 T HERMOSTAT
PLEASE READ T HE G UIDE BEFORE C OMMENCING INSTALLATION
HH 6 T hermostat
The HH 6 T hermostat is designed to control 2 heat sources with a
combined total of 600 watts. T his may include heatmats, ceramics,
bulbs and heat cable.
The HH 6 thermostat will control two independent heat sources at
different temperatures set by the user on the heater dials by switching
the power on/off to the heaters.
The HH 6 thermostat can be used to control 2 separate vivariums with
independent heating control or it can be used to control 1 vivarium with
separate temperature controls for the heater and basking spot.
WARNING
DO NOT OVERLOAD YOUR THERMOSTAT BY CONNECTING
HEAT SOURCES WITH OUTPUTS GREATER THAN 600 WATTS COMBINED.
DAMAGE CAUSED BY MISUSE IS NOT COVERED BY THE WARRANTY.
HH 6 Thermostat
User Guide
PF0200