NYSW SOHO Series P103A-01 Instruction Manual page 3

NYSW
. Correct Watch Position for Signal Reception
Your watch should be positioned according to the following picture and put nearby a window during signal
reception or you would not be able to get the best reception result.
1. Metal Case with metal Bandway as a standard watch.
-Never let the metal band touches the case-back as it will affect signal reception.
-Never put the watch by its side as it will not able to get signal on this position.
2. Correct positions for signal reception
For metal case with metal band watch, the watch-band should be away from the watch case as show below
(insert the match box between the case back and the metal band) or it will affect the reception
New York Standard Watch Company
Instruction Manual
SOHO Series - P103A-01, P103A-02, P201-07, P201-08
(3 hands Analog-Digital Atomic Watch)
.
www.NewYorkStandardWatch.com
2007 EN
Page 3