NYSW Fifth Avenue Series Instruction Manual

NYSW
. Introduction
Congratulations on your recent purchase of the NYSW Radio Controlled Atomic Time Watch. Be sure to read
the "Quick Set Up" manual before using the watch for the first time. The following instructions have more
detailed information about our watches than the "Quick Set Up Guide". Please keep this manual in a safe place
for future reference.
Your Atomic (Radio Controlled) Watch is a Multi-Band Radio Control Watch.
It incorporates a highly sensitive radio receiver that receives time signals from USA, UK, Germany or Japan
automatically according to your Time Zone setting on the Watch.
**. Your Radio Controlled Watch even changes automatically for Daylight Saving Time (when applicable).
Automatic Time Setting
Your Atomic Time (radio controlled) Watch recalls the available Atomic Clock signal automatically at 3:00AM
every night according to your Time Zone setting (go to Time Zone setting for details). After the signal from the
tower is received it will show the official local time on the watch. Everything is done automatically.

. Button Functions

OK
NG
New York Standard Watch Company
Instruction Manual
Fifth Avenue Series - 1310L-021GN
(3 hands Analog-Digital Atomic Watch)
S1 (is the upper button):
● Holding S1 to manually search for the radio signal.
S1
S2 (is the middle button):
● Press S2 once to show the signal reception Succeed
S2
(OK at 12 O'clock) or Failed (NG at 6 O'clock)
● Holding S2 for Second-hand re-calibration
S3 (is the lower button):
S3
● Press S3 once to show current Time Zone setting
● Hold the S3 button to show either AM or PM.
.
www.NewYorkStandardWatch.com
M43 multi-band version (1.0)
Page 1