Table of Contents
Advertisement
Quick Links
Vetlab Premiere 125
Biological Binocular
Microscope
USER MANUAL
To obtain the best results from your microscope, please read this manual before using
WARNING: To prevent fire or shock hazard, do not expose this unit to rain or moisture.
CAUTION:
No user-serviceable parts inside. Refer servicing to qualified service personnel.
®
Premiere
trademark reg. No. 1713212 USA
Vetlab Supplies Ltd Unit 13 Broomers Hill Park Broomers Hill Lane Pulborough RH20 2RY
Telephone 01798 874567
Fax 01798 874787
Email
info@vetlabsupplies.co.uk
www.vetlabsupplies.co.uk
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for premiere Vetlab 125
Summary of Contents for premiere Vetlab 125
-
Page 1: User Manual
Vetlab Premiere 125 Biological Binocular Microscope USER MANUAL To obtain the best results from your microscope, please read this manual before using WARNING: To prevent fire or shock hazard, do not expose this unit to rain or moisture. CAUTION: No user-serviceable parts inside. Refer servicing to qualified service personnel. - Page 2 APPLICATION This microscope is widely used in Biology, Bacteriology, Histology, Pathology, Medicament Chemistry research and clinical examination. It is also ideal for use in veterinary laboratories, schools and colleges. CONFIGURATION Binocular head Stand Objective Eyepiece Tension adjusting ring Nosepiece Coarse focusing knob Mechanical stage The adjusting rod of...
- Page 3 SPECIFICATIONS Viewing Sliding Binocular Head, Inclined at 45˚ Head (55mm-75mm) Eyepiece WF10×/18mm Nosepiece Quadruple nosepiece Achromatic objective：4× 10× 40×(S)100×(S)Oil Objectives Double layer mechanical stage Stage size：140mm×140mm Stage Moving range：75mm×50mm Condenser N.A.1.25 Abbe condenser with iris diaphragm & filter Coaxial coarse & fine focusing adjustment with rack and Focusing pinion mechanism.
- Page 4 ASSEMBLY INSTRUCTIONS 1. Remove the microscope stand from box and Styrofoam packing and place it on a stable work table. 2. Remove all plastic bags and coverings (these can be discarded). 3. Remove binocular head from the packing. 4. Remove the plastic cap covering the neck of the microscope base and the one on the bottom of the binocular head.
- Page 5 Begin observation of your specimen with the 4x Objective. Turn the coarse focusing knob until a clear image is obtained, then use the fine focus knob to enhance the observation of the specimen to its clearest image. On the coarse focus knob is a tension control ring (located on the right side of the microscope against the stand) which can be turned to tighten or loosen the tension of the focusing knob to the user’s desired setting.
- Page 6 The condenser assembly under the stage can be shifted up or down by means of the control knob (left hand side under stage) to effectively move the light beam closer to (up) or away from (down) the specimen under observation. Finally, the dimmer control also allows the user to adjust the intensity of the halogen light.
- Page 7 Bulb Replacement Unplug unit from power source. Allow bulb to cool before removal. (It will become very hot during use). Loosen the screw knob on the underside of microscope and open the panel to expose the bulb. Remove the old bulb. Important: Do not touch the halogen bulb with bare hands.
- Page 8 It does not cover damage resulting from abuse or misuse, repairs or alterations performed by other than authorised repair technicians, or damage occurring in transit. If you have any problems with your Vetlab Premiere 125 microscope during the two year warranty period, please contact: Vetlab Supplies Ltd.
Need help?
Do you have a question about the Vetlab 125 and is the answer not in the manual?
Questions and answers