Getting Started - Eircom Sixty Quick Start Manual

Getting Started

Connecting the base
Before making any connections,
please refer to the safety instructions
presented at the beginning of this
quick start guide. Never force the
plugs: they are in different shapes to
avoid connection mistakes.
Telephone socket Power socket
Step 1 Connect the phone jack into
the correct slot underneath
the base station & connect the
other end into the telephone
wall socket
Step 2 Connect the power supply
to the underside of the base
station and plug in. The phone
display will turn on.
Setting up the handset
The batteries are already inserted in the
handset. To put the handset into use,
simply remove the tab by pulling on it
firmly in the direction of the arrow.
The handset emits a double beep to
indicate that it has started and then
a second beep to indicate that the
handset is synchronized with the base.
From then on, your handset becomes
operative and you can use it to make
calls.
Charging the batteries
Place the handset on the base – a
sound will occur and a light will flash
when the handset is placed on the base
correctly.
For optimal battery charge, you
should leave the handset in the base
uninterrupted for approx 10 hours.
During charging, batteries may heat
up. This is safe and will ensure your
batteries are fully charged.
Only use certified rechargeable
batteries. Non rechargeable batteries
could damage your handset.