Sea&Sea MDX-D810 Instruction Manual page 25

Finder
This product comes equipped with a 0.5x pick-up finder. The finder can
be replaced with an optional finder so you can change the finder magnifi-
cation to match your shooting conditions.
Replacing the finder Unit
The optional VF45 1.2x (46111) or
VF180 1.2x(46112) enhances
magnification by 1.2x and enables
subtle framing and focusing of
subjects.
CAUTION
When replacing the finder unit, always refer to the instruction manual
provided with the VF45 1.2x or VF180 1.2x.
Replacing the pick-up finder
1
Rotate the finder unit mounted on
the rear case in a counterclockwise
direction to remove it
The screw areas are coated in
grease, so be careful not to touch
them.
2
Rotate the replacement finder
unit in a clockwise direction to
attach it
CAUTION
Before attaching the finder, check to make sure that there is no dust, dirt,
or debris inside it.
When replacing the finder, do not touch the surface of the finder lens.
When replacing the pick-up finder, always refer to the instruction manual
provided.
Attaching the Optional Accessories
E-24