When using the provided light shielding plate
When the strobe is triggered by sensing the light from the camera's built-in
flash, the light from the built-in flash may be exposed in the image. This can
be prevented by using the provided light shielding plate.
1
Attach the light shielding plate
to the connector holders inside
the front case using the
fiber-optic connector socket
caps
2
Pop up the camera's built-in
flash and mount the camera in
the housing
CAUTION
When the light shielding plate is attached, the camera's built-in flash
cannot be retracted with the flash closing lever of the housing.
Take care not to damage the built-in flash against the housing internals.
Attaching the Optional Accessories
Fiber-optic cable socket cap
Light shielding plate
Connector holders
E-22