Download Print this page

Network Setting - Megasat SAT>IP Server User Manual

Hide thumbs Also See for SAT>IP Server:

Advertisement

Available languages

Available languages

4. Network Setting:

• Network Interface:
The default network interface of the SAT>IP switch/server is utilizing Ethernet
network. Users do not need to adjust the setting if the SAT>IP switch/server is
installed in the Ethernet environment.
• IP Settings:
Automatic or Static mode can be chosen by users in the function. The default
IP setting is automatic mode. The SAT>IP switch/server does not include DHCP
function, so it needs to be connected to a router or switch with DHCP function.
Once the SAT>IP switch/server is correctly connected to a device with DHCP
function, users do not need to adjust the setting.
• Time Correction:
The function is to setup appropriate time zone for the SAT>IP switch/server, so
online upgrade can be correctly conducte
Network Settings
On the other hand, using static mode is recommended for professional users only.
These professional users need to know specific information of IP, Netmask, Gateway,
and DNS.
ENGLISH
04
5. Software Upgrade:
Upgrading software of the SAT>IP switch/server can be done through the Web User
Interface or Internet. Users can choose updated software images from their local
hard driver and then upload to the SAT>IP switch/server.
For online upgrade, the system default is Enabled, so the SAT>IP switch/server will
automatically check whether new software is available. Also, users can click
"upgrade now!" to immediately get the latest software from the device manufacturer.
Software Upgrade
Once the software is successfully upgraded, you can see message below in green. The
system will automatically restart once update is completed; user might need to recon-
nect to WebUI.
ENGLISH
05

Advertisement

loading
Need help?

Need help?

Do you have a question about the SAT>IP Server and is the answer not in the manual?

Subscribe to Our Youtube Channel