Kenwood KR-V8090 Service Manual page 4

QQ
1060VR/1070VR/KR-V8090/KR-V9090
3 7 63 1515 0
TE
L 13942296513
1 POWER key
Use to turn the receiver on and off.
Use in combination with the input selector
(AUDIO, VIDEO, or TV) keys and SHIFT
key to turn various components on and
off.
2 MACRO key
Use in combination with the AUDIO, VID-
EO, or TV keys to execute a series of
commands automatically (MACRO
PLAY).
3 VIDEO selector key
Selects the video inputs (VIDEO 1,
VIDEO 2, VIDEO 3, AV AUX) and sets
the remote to operate the component reg-
istered at the respective input.
4 Multi control keys
Use to operate the selected component.
5 REC key
Use to operate the selected component.
6 TUNING/SKIP key
Use during the setup procedure to specify
various settings. Use to operate the tuner
or selected component.
7 SUBWOOFER key
Use in combination with the VOLUME +/-
www
keys to adjust the volume of the
subwoofer.
4
1
2
3
4
5
6
7
8
9
8 FUNCTION SHIFT key
Use in combination with the numeric keys
to execute alternate commands.
9 Numeric keys
Provide functions identical to those of the
original remote supplied with the compo-
nent you are controlling.
To access the functions printed above the
keys, Press within 3 seconds of pressing
the FUNCTION SHIFT key. Function
availability varies for each component.
0 SHIFT key
Use in combination with the AUDIO and
VIDEO keys to change the remote control
mode without changing the input selector
or in combination with the POWER key to
turn on and off components programmed
into the remote.
! TV selector key
Sets the remote to operate a TV or cable
box (TV 1, TV 2, CABLE). This key does
not change the input selector on the re-
ceiver.
x ao
. i
CONTROLS
POWER
MACRO SHIFT
AUDIO
VIDEO TV
8
P. CALL P. CALL
BAND
6
4 ¢
7
REC GUIDE
TUNING/SKIP VOLUME
MUTE
LISTEN
SUBWOOFER MODE SOUND
FUNCTION
SETUP
SHIFT
MENU THEME FAV
1 2 3
TV/SAT/VID INFO ALT AUD
4 5 6
+100 REPEAT RANDOM
7 8 9
DISPLAY
0
+10 ENT
Q Q
REMOTE CONTROL UNIT
3 6 7
RC-R0805
u163
y
2 9 9 4
8
0
!
@
#
$
%
^
&
*
1 3 1 5 0 5 8 2 9
@ AUDIO selector key
Selects the audio inputs (CD, TAPE/MD.
TUNER, PHONO) and sets the remote to
operate the respective KENWOOD audio
component.
If you connect audio components from
KENWOOD and other makers to the
TAPE/MD or CD jacks, you can set the
remote to operate these components by
registering the appropriate setup code at
the respective input.
# GUIDE key
Use to activate the OSD menu functions
of registered components.
$ VOLUME key
Use to adjust the receiver volume.
% MUTE key
Use to temporarily mute the sound.
^ SOUND key
Use to adjust the bass, treble, and input
level.
& LISTEN MODE key
Use to select the desired surround mode.
* SETUP key
Use to adjust the surround setup.
m
co
.
2 8
9 9
9 4 2 8 9 9