Interior Storage; Slide-Out Rooms (If Equipped); Interior And Furnishings; Dinette Conversion (With Built-In Table) - Fleetwood 2003 Southwind User Manual

Living With Your Motor Home
Interior Storage
The closets and cabinets have catches along one
edge of the door. Pull on the cabinet door handle
to open. Overhead doors have supports to hold
them open. Drawers rest in notches when they
are closed. To open drawers, lift up slightly, then
pull open.
Closets may be equipped with 12-volt lights that
turn ON when the closet door is opened. Be sure
the light goes OFF when the closet door is
closed-your battery will be discharged if it
stays ON. If the light stays on when the door is
closed, the door switch requires adjustment.
The same loading considerations apply to inte-
rior storage areas as to exterior. Consult the
Motor Home Loading
section in the
On The
Road
chapter.
SLIDE-OUT ROOMS
(If Equipped)
Your new motor home may be equipped with an
optional slide-out room. The slide-out room(s)
are designed to provide additional living space.
A detailed operating and maintenance guide is
included in your
Owner's Information Package.
Read all instructions for these systems carefully
before operating the slide-outs.
In some installations it may be necessary to
slide the driver's seat to the full forward position
and place the seat back in the full upright posi-
tion prior to moving the slide-out room in or out
to prevent the room from striking or rubbing
against the seat back.
For operation of the slide-out room the follow-
ing is required:
• Ignition on (engine running)
• Transmission in park
• Parking brake engaged
• Slide-out key or switch activated
Always exercise caution when operating the
slide-out room.
06-4
CAUTION
I
Never attempt to move your motor home with the
slide-out room(s) extended. Damage can occur to the
slide-out or motor home.
CAUTION
I
In case of a power failure, the slide-out room can be
retracted manually. Be sure to understand the opera-
tion section as explained in the slide-out systems
Operations Manual in the Owner's Information
Package.
INTERIOR AND FURNISHINGS
The materials used inside your motor home
have been selected for durability and comfort.
With reasonable care, these materials will
stand up under years of recreational living. The
Maintenance
chapter in this manual outlines
care requirements for the various upholstery
fabrics, floor, cabinet, and wall finishes.
Dinette Conversion
(with Built-in Table)
To convert the dinette into a bed:
1. Remove cushions.
2. Lift table, reach underneath, unlatch and
fold the leges) up under the table top, or
remove the table leges) and if necessary,
store them between the seats.
3. Raise front portion of table several inches
to disengage inserts from the wall supports.
4. Lower table top to the dinette frame to
complete the bed base.
S. Slide seat and back cushion into place over
the bed base.
The under-seat storage may be reached by
raising the cushion platform.
,----
,
~~