Sony SLV-M10HF Operating Instructions Manual page 69

To use the shuttle ring in jog mode
Use this mode for frame-by-frame playback.
Press JOG to enter jog mode. The JOG button lights up. If you change to jog
mode during any playback mode, the playback pauses so you can see a still
picture. Each change in the shuttle ring position shifts the picture one frame.
To shift frames in reverse, turn the shuttle ring counterclockwise.
The frame shift speed depends on the speed you turn the shuttle ring.
To resume normal playback, press JOG again. The JOG indicator goes off.
To resume normal playback
Press · PLAY.
Tip
• Adjust the picture using the TRACKING +/– buttons if:
– streaks appear while playing in slow motion.
– bands appear at the top or bottom while pausing.
– the picture shakes while pausing.
Notes
• The sound is muted during these operations.
• Tapes recorded in the LP mode on other VCRs can be played back on this VCR but
the picture quality cannot be guaranteed.
• The picture may have snow:
– when playing at high speed in reverse.
– when playing in reverse slow motion.
– when playing in reverse.
• If the playback mode mark doesn't appear on the TV screen, press DISPLAY.
• The picture may flutter a bit when playing in slow motion.
Additional Operations
69