Sony SLV-M10HF Operating Instructions Manual page 66

Setting the timer manually (continued)
Daily/weekly recording
In step 2 above, push the cursor stick to . to select the recording pattern.
Each time you push the cursor stick to ., the indication changes as shown
below. Push the cursor stick to > to change the indication in reverse order.
Tips
• To set the channel, you can also use the CH +/– or number buttons.
• You can set the channel with the shuttle ring during stop. However, you cannot set
the channel with the shuttle ring on the remote commander when:
– you set CABLE MOUSE in the CABLE BOX CONTROL menu to ON.
– you press JOG so that VCR is in jog mode.
• To set the tape speed, you can also use the SP/EP button.
• When you are recording a program in SP mode and the remaining tape becomes
shorter than the recording time, the tape speed is automatically changed to EP
mode. Note that some noises will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, set AUTO TAPE SPEED to OFF in the
ADVANCED OPTIONS menu (page 83).
• To lock the VCR after setting the timer, see page 63.
Notes
• If you are using cable box control, you cannot select "LINE1" or "LINE2."
• The station ID appears on the TV screen only when you complete Smart Channel
Mapping and the VCR receives the program information signal (see page 49).
66
Basic Operations
the current date n SUN-SAT n MON-SAT n MON-FRI n EVERY SAT .....
n EVERY MON n EVERY SUN n 1 month later n (date counts down) n
the current date