Sony SLV-M10HF Operating Instructions Manual page 42

Setting up cable box control (continued)
To ensure correct operation
• Place the Cable Mouse so that it hangs out over the cable box/DSS
receiver front.
• Do not place the cable box/DSS receiver on top of the VCR.
• Position the cable box/DSS receiver away from the VCR.
• Point the remote commander at the VCR, not at the cable box/DSS
receiver.
Side view
To check the cable box control setting
1
2
If the answer to both 1 and 2 is "yes," you have made the correct setting.
42
Getting Started
: Signal flow
Press CH +/– on the remote commander. Does the channel indicator
on the cable box/DSS receiver change? (Point the remote commander
at the VCR, not at the cable box/DSS receiver.)
Press all 10 number buttons (0 to 9) on the remote commander. Does
the channel indicator on the cable box/DSS receiver change?
1 2 3
4 5 6
7 8 9
0