Sleep Timer; Alarm Mode - Telefunken TF-1505 Instruction Manual

Instruction manual
pressed within 10 seconds after a parameter
is selected, the unit will automatically go to clock
mode.
• In the time setting mode, press the MODE
button to cycle through the set parameters and
return to the clock mode.
AUX input
To connect an external audio device (e.g.
an MP3-player), please use a standard stereo
cable with 3.5 mm to 3.5 mm plugs to connect
the audio line-out of the external device to the
AUX input socket of this unit (the cable should
be aquired separately).
LED display functions
• To save energy (when working on the
AC/DC adapter) or battery life (when working
on batteries), you can turn the display off by
switching the DISPLAY ON/OFF switch to the
OFF position. While in this mode you can turn
it on for 10 seconds by pressing any button or
by a loud sound (e.g. clapping your hands).
• The brightness of the display is set to half
from 22:00 to 6:59:59. Alternatively, press the
SNOOZE button to adjust brightness manually.
Radio operation
• In the clock mode press the RADIO button
to switch the radio on.
• Press TURN+/TURN- buttons on the unit
to change the current frequency upwards
or downwards by 100 KHz. Press and hold
TURN+/TURN- buttons to search the nearest
strong signal station upwards or downwards
automatically. Hold MODE button, P01 will
blink on the screen. Press repeatedly TURN+/
TURN- buttons to select the preset number for
the current frequency. Press MODE to save
the frequency in selected position (P01-P20).
Press and hold the ALARM button: the device
will start scanning from the lowest frequency
and automatically save all available stations in
positions (up to 20). When stations are saved
in the memory, repeatedly press TURN+/
TURN- buttons to select the saved stations.
4
4

Sleep timer

• Press the SNOOZE button to set the
sleeping time of the radio, repeatedly press to
change the sleeping time interval from 10 to 90
minutes. When the time expires, the radio will
turn off.
During program saving, if no button is
pressed within several seconds, the unit will
return to the normal radio mode.
• To adjust volume, repeatedly press the
VOL+/VOL- buttons in the radio mode, with
minimum level of 00 and maximum of 15.
• Press RADIO to switch the radio off.
Alarm operation

Alarm mode

• In clock mode, hold the ALARM button to
set the alarm time.
• Repeatedly press the ALARM button to
set the parameters in the following sequence:
hours => minutes => exit. While setting, the
digits will flash. Press the TURN+ or the
TURN- buttons to adjust the time. If no button
is pressed within 10 seconds after a parameter
is selected, the unit will automatically set the
alarm.
• If no button is pressed within 10 seconds in
the alarm mode, the unit will exit to the clock
mode.
Alarm ringing
• When setting the alarm, press RADIO,
then the playing radio station will be set as the
alarm (the playing radio frequency is set as the
last played radio frequency),
The alarm will ring for 15 minutes.
• If no radio station was set as an alarm
signal, then the unit will beep periodically.
• After setting the alarm, press the MODE
button to exit to the clock mode.
When setting radio as an alarm signal,
make sure the DISPLAY ON/OFF switch on the
back panel is switched to ON. Otherwise the
alarm will go off in standard beeping mode.
• Press the ALARM button to enter the alarm