Sleep Timer; Setting The Alarm; Usb/Sd Operation - Telefunken TF-1580UB Instruction Manual

Sleep timer

• After setting the time you can
press and hold the MODE button to select
the sleep time period. Sleep time will
appear on the display.
select the sleep time period (15-120
minutes) or switch it off. The unit will turn off
automatically after the sleep time period
elapses.
• Once the date, time and sleep
timer are all set, press the CLOCK button
to exit the setting mode or wait 10 seconds.

Setting the alarm

• This device supports up to 4 alarms.
Operations are as follows:
• In clock mode press and hold CLOCK
to enter the alarm setting mode.
• Rotate the volume knob to
to select the alarm number (AL1 - AL4).
• Press the MODE button.
Hour digits will flash. Rotate the volume knob to
adjust the hour setting.
• Press the MODE button again.
Minute digits will flash. Rotate the volume knob
to adjust the minute setting.
• Once the alarm setting is finished, press
the CLOCK button to confirm. An alarm
indicator will appear on the screen.
• If you want to cancel the alarm,
press and hold the NEXT button. Alarm
indicators will disappear from the screen.
• When the alarm time comes, the signal will
sound if no button is pressed. Press any
button to stop the ringing.
• When the alarm is on, press the
PLAY/PAUSE button to interrupt the
alarm signal. After 5 minutes the alarm
will be on again.
Rotate the knob to
Instruction manual
Radio
• Press and hold STANDBY to power on
the unit.
• Press the MODE button to select the
the radio mode. The display will show
the current frequency and the FM icon
will light on.
• To automatically scan and save
radio stations press and hold PLAY/PAUSE
on the unit or FM/SCAN on the RC. The unit
will scan and save up to 50 stations and
save them as P01, P02, P03... P50.
• Press NEXT or PREVIOUS to switch
to the next or previous radio station. Press and
hold these buttons to go to the nearest station
without saving.
• Press the PLAY/PAUSE buttons to mute
or unmute the radio.
• You can rotate the FM scan knob
to fine tune the radio frequency.
• You can use the numeric buttons on the
remote control to directly input the frequency of
your favorite station. For example, by pressing
0901 on the RC the unit will go to 90.1 MHz.
Press EQ/SAVE on the RC to save the station.

USB/SD operation

• Insert a USB device into the USB port or
insert a memory card into the memory card
slot. The unit will start reading the device.
Press MODE button to select among USB
and SD modes, if several storage devices are
inserted.
5