Table of Contents
Advertisement
SERVICE PROCEDURE-2
1.Remove the solder of Laser Diode shorting
1-1
Connect Pickup and DVD main circuit PC board by FFC(CP21 and B04).
1-2
Fix it with the DVD Mecha
1-3
Remove the solder of Laser Diode shorting on Pickup.
2. Factory setting (Initial setting)
2-1 Push the power switch "ON" (Mechanical switch)
2-2 Press the [STOP] and [STANDBY ON] keys at same time, and
it waits until the display of FL tube will be the display of "No Disc" from "Loading".
Pickup Short Land
DV-SP300
- Quick Links:
- Service Procedure
Hide quick links:
Advertisement
Table of Contents
