IDTECK Star 100W User Manual page 16

12-23. Change Alarm Time When Try-Out Error is Detected
(Refer to Table 1 for OM,
Configuration Card Command
/Configuration PIN
12-24. Change Alarm Time When Door Contact Error is Detected
(Refer to Table 1 for OM,
Door Open Time-out setting is required for activating, refer to 12.81.
Configuration Card Command
/Configuration PIN
12-25. Change Alarm Time When AUX Input #1 Detected
12-26. Change Alarm Time When AUX Input #2 Detected
12-27. Change Alarm Time When AUX Input #3 Detected
(Refer to Table 1 for OM,
Configuration Card Command
/Configuration PIN
12-28. Change Alarm Time When Magnet Detected
(Refer to Table 1 for OM,
Configuration Card Command
/Configuration PIN
12-29. Register 2 Digit Duress Alarm Password
(PW=00~99, Default PW= 00, Do not use
Configuration Card Command
/Configuration PIN
tt
=00~99 sec., Default Alarm time = 10 sec.
Output Mode Door time Alarm Time
tt
)
=00~99 sec.
Output Mode Door time Alarm Time
tt
)
=00~99 sec.
Output Mode Door time Alarm Time
tt
)
=00~99 sec.
Output Mode Door time Alarm Time
Password
Note: The default Password is '00'.
16
)
TTL time
TTL time
TTL time
TTL time
)