Canon PowerShot A 620 User Manual page 93

64
Aim the
cam~ra
so that the desired color
appears at the cent.er of the LCD monitor
and press the .. button.
• Only one color can be specified.
~
\!!J •
• This completes the setting.
• If you press the MENU button at this point, you will
return to the screen where you can select a My Colors
mode.
• green
into white.
•
Yo~
may not obtain the expected results after color
input mode if you use the flash, or change the white
balance ·or metering settings.
• The colors specified in the color swap mode are
retained even if the camera's power is turned off.
Setting the Camera to a Custom Color
Mode
This· mode allows you to adjust the color balance for red,
green, blue and skin tones.
~
(Custom Color)
~
0 .
MENU
See Menus and Settings (p. 22).