Canon PowerShot A 620 User Manual page 75

46
Selecting an AF Frame Manually
(when [FlexiZone] is selected)
1
Turn on the LCD monitor
2
Press the
~
button several times until
the AF frame turns green.
• Depending on the shooting mode, you can switch
between the following setting options by pressing the
~
button.
P
Exposure compensation/AF frame
Tv
Shutter speed/Exposure compensation/AF frame
Av
Aperture value/Exposure compensation/AF frame
M
Shutter speed/Aperture value/AF frame
3
Use the ... , .. , ... or .. button to move
the AF frame to the desired position and
press the
~
button.
• If you hold down the
~
button, the AF frame will
return to the original position (center) (at the same
time, the setting options will switch as shown in the
above table).
• When [Spot
AE
Point] is selected as the light metering
mode, you can use the selected AF frame as the Spot
AE Point (p. 53).
• It cannot be selected while manual focus is being used
(p.48)_