VTech DS6621 Abridged User Manual page 2

Dial a redial list entry
3. To answer the intercom call, press /HOME,
/CELL, , or any dialing key on the • Press /HOME, /CELL, or to dial.
destination handset.
4. To end the intercom call, press OFF or place Delete a redial list entry
the handset back in the telephone base or
When the desired redial entry displays, press
charger.
DELETE.
Transfer a call
While on an outside call, you can use the Phonebook
intercom feature to transfer the call from one
handset to another.
The phonebook can store up to 1000 entries,
1. Press MENU on your handset during a call. which are shared by all handsets. Each entry
may consist of a telephone number up to
2. Press or to scroll to Intercom, and
30 digits, and a name up to 15 characters.
then press SELECT. The current call is
put on hold. Use the dialing keys to enter a
Add a phonebook entry
destination device number.
1. Press MENU when the phone is not in use.
3. To answer the intercom call, press /HOME,
2. Scroll to Phonebook then press SELECT.
/CELL,
, or any dialing key on the
3. Press SELECT again to choose Add new
destination handset. You can now have a
entry.
private conservation before transferring the
call.
4. Enter the number.
4. To transfer the call, press OFF on the • Use the dialing keys to enter the number
initiating handset or place the initiating
(up to 30 digits).
handset back in the telephone base or 5. Press SELECT to move to the name.
charger.
6. Use the dialing keys to enter the name (up to
5. To end the call, press OFF on the
15 characters). Additional key presses show
destination handset or place the destination other characters of that particular key.
handset back in the telephone base or
7. Press SELECT to save.
charger.
While entering numbers and names, you
can:
Answer an incoming call during an
intercom call • Press DELETE to erase a digit or character.
If you receive an incoming call during an • Press and hold DELETE to erase the entire
intercom call, there is an alert tone. entry.
or
• To answer a home call, press /HOME. The • Press to move the cursor to the left
intercom call ends automatically. or right.
• To end the intercom call without answering • Press and hold PAUSE to insert a dialing
the outside call, press OFF. The intercom call pause (for entering phone numbers only).
ends and the telephone continues to ring.
• Press 0 to add a space (for entering names
• To answer a cell call, press OFF to end the only).
intercom call. The telephone continues to
• Press to add ( appears) or to add
ring. Then press /CELL.
# ( appears) (for entering phone numbers
only).
Redial list
Review the phonebook
Entries are sorted alphabetically.
Each handset stores the last 10 telephone
1. Press when the phone is not in use.
numbers dialed. When there are already 10
2. Scroll to browse through the phonebook, or
entries, the oldest entry is deleted to make room
for the new entry. use the dialing keys to start a
name search (you can enter up to
Review the redial list
3 characters for the search).
1. Press REDIAL when the handset is not in use.
3. When the desired entry appears, press
, or REDIAL repeatedly until the
2. Press , or to dial.
desired entry displays.
Delete all old messages at the telephone Remote access code
base
A two-digit security code is required to access
To delete all old messages at the telephone the answering system remotely from any touch-
base: tone telephone. The preset code is 19. You can
set the code from 00 to 99.
Press X/DELETE twice when the phone is not
in use. Press MENU when the phone is not in use.
1.
2. Scroll to Answering sys then press SELECT.
To delete all old messages on a handset:
Scroll to Ans sys setup then press SELECT.
3.
Press MENU when the phone is not in use.
1.
4. Scroll to Remote code, and then press
2. Scroll to Answering sys, and then press
SELECT.
SELECT.
5. Use the dialing keys to enter a two-digit number.
3. Scroll to Delete all old, and then press
-OR-
SELECT twice. You hear a confirmation tone. Scroll to a desired two-digit number.
Press SELECT to save and you hear a
6.
confirmation tone.
Remote access
A two-digit security code is required to access
the answering system remotely from any
Use the built-in answering system
touch-tone telephone. The preset code is 19.
and voicemail service
You can use this preset code, or set your own.
You can use your answering system and
1. Dial your telephone number from any
voicemail service together by setting your
touch-tone telephone.
answering system to answer before voicemail
2. When the system plays your announcement,
service answers as described below. To learn
enter the two-digit security code.
how to program your voicemail settings, contact
3. You can enter one of the following remote your telephone service provider.
commands.
If you are on a call, or if the answering system
is busy recording a message and you receive
Command Description
another call, the second caller can leave a
voicemail message.
1 Play all messages.
Set your answering system to answer calls
2 Play new messages.
at least two rings earlier than your voicemail
service is set to answer. For example, if your
3
Delete the current message
voicemail service answers after six rings, set
(during playback).
your answering system to answer after four
33 rings. Some voicemail service providers may
Delete all old messages.
program the delay before answering calls in
4 Repeat the current message
seconds instead of rings. In this case, allow
(during playback).
six seconds per ring when determining the
appropriate setting.
5 Stop.
*5 Hear a list of remote
commands. Retrieve voicemail from
telephone service
6 Skip to the next message
(during playback).
Voicemail is a feature available from most
telephone service providers. It may be included
*7 Record a new announcement.
with your telephone service, or may be optional.
8
End the call. .
Fees may apply
0 Turn the answering system
Retrieve voicemail
on or off.
When you received a voicemail, the handset
displays and New voicemail. To retrieve,
4. Hang up or press 8 to end the call.
you typically dial an access number provided by
your telephone service provider, and then enter
a security code. Contact your telephone service
provider for instructions on how to configure the
voicemail settings and listen to messages.
Delete a phonebook entry Save a caller ID log entry to the
phonebook
1. When the desired entry displays, press
DELETE.
1. When the desired caller ID log entry
2. When the screen displays Delete entry?, displays, press SELECT.
press SELECT.
2. Scroll to To Phonebook then press
SELECT.
Delete all phonebook entries :
3. Use the dialing keys to modify the number,
1. Press MENU when the phone is not in use.
and then press SELECT.
2. Scroll to Phonebook, and then press SELECT.
4. Use the dialing keys to modify the name,
3. Scroll to Delete all, and then press SELECT
and then press SELECT to save.
4. When the screen displays Delete all?, press
SELECT.
Delete a caller ID log entry
• When the desired caller ID log entry displays,
Edit a phonebook entry
press DELETE.
1. When the desired entry displays, press
SELECT.
Delete all caller ID log entries
2. Use the dialing keys to edit the number, and
• Press MENU when the phone is not in
then press SELECT.
use. Scroll to Caller ID log and then press
3. Use the dialing keys to edit the name, and
SELECT. Scroll to Delete all and then press
then press SELECT to save.
SELECT twice.
Dial a phonebook entry
• When the desired entry appears, press Call block
or to dial.
If you subscribe to caller ID service, you can
set the telephone to block unknown calls and
Caller ID certain undesired calls.
The call block list stores up to 20 entries.
If you subscribe to caller ID service, information
Block unknown calls
about each caller appears after the first or
1. Press MENU when the phone is not in use.
second ring. If you answer a call before the caller
information appears on the screen, it will not be 2. Scroll to Call block, and then press SELECT.
saved in the caller ID log.
3. Scroll to Calls w/o num, and then press
The caller ID log stores up to 50 entries. Each SELECT.
entry has up to 24 digits for the phone number
4. Scroll to choose Not block or Block, and
and 15 characters for the name.
then press SELECT.
If the telephone number has more that 15 digits,
only the last 15 digits appear. If the name has more Add a call block list entry
than 15 characters, only the first 15 characters are
1. Press MENU when the phone is not in use.
shown and saved in the caller ID log.
2. Scroll to Call block, and then press SELECT.
3. Scroll to Block list, and then press SELECT.
Review a caller ID log entry
4. Scroll to Add new entry, and then press
1. Press CID when the phone is not in use.
SELECT.
2. Scroll to browse through the caller ID log.
5. Enter the number.
When the desired entry appears:
• Use the dialing keys to enter the number
• Press repeatedly to show different
(up to 30 digits).
dialing options.
6. Press SELECT to move to the name.
• Press 1 repeatedly if you need to add or
7. Use the dialing keys to enter the name (up to
remove 1 in front of the phone number.
15 characters). Additional key presses show
3. Press or to dial the displayed number. other characters of that particular key.
8. Press SELECT to save.
Dial a caller ID log entry
• When the desired entry appears, press
or to dial.
Turn off the new voicemail indicators Cleaning your telephone
If you have retrieved your voicemail while away Your telephone has a durable plastic casing that should
from home, and the handset still displays the new retain its luster for many years. Clean it only with a
voicemail indicators, use this feature to turn off dry non-abrasive cloth. Do not use dampened cloth or
the indicators. cleaning solvents of any kind.
NOTE
This feature turns off the indicators only, it does not
Frequently asked questions
delete your voicemail messages.
1. Press MENU when the handset is not in use.
The following are the questions most frequently asked
2. Scroll to Settings, and then press SELECT. about the cordless telephone. If you cannot find the
answer to your question, visit our website at
3. Scroll to Clr voicemail, and then press
www.vtechphones.com or call 1 (800) 595-9511 for
SELECT.
customer service. In Canada, go to
www.vtechcanada.com or call 1 (800) 267-7377.
Expand your telephone system
My telephone Make sure the telephone base is
does not work installed properly, and battery is
at all. installed and charged correctly.
You can add new handsets (DS6600), cordless
For optimum daily performance,
headsets or speakerphones to your telephone
return the handset to the
system (purchased separately) to your
telephone base after use.
telephone system. Visit www.vtechphones.com
for a list of compatible devices. Your telephone The display Disconnect the telephone line
base supports a maximum of five devices. shows No line. I
cord from your telephone and
cannot hear the connect it to another telephone.
For more details, refer to the user's manual that
dial tone. If there is no dial tone on that
comes with your DS6600 new handset, cordless
other telephone either, then
headset or speakerphone respectively.
the telephone line cord may be
defective. Try installing a new
telephone line cord.
ECO mode
If changing telephone line cord
does not help, the wall jack
This power conserving technology reduces power
(or the wiring to this wall jack)
consumption for optimal battery performance. The ECO may be defective. Contact your
mode activates automatically whenever the handset is telephone service provider.
synchronized with the telephone base.
You may be using a new cable
or VoIP service, the existing
telephone jacks in your home
General product care
may no longer work. Contact
your service provider for
Taking care of your telephone solutions.
Your cordless telephone contains sophisticated The display The handset is deregistered from
electronic parts, so it must be treated with care.
shows To the telephone base.
Avoid rough treatment register HS...
Place the handset in the
and ...see
Place the handset down gently. Save the original telephone base to register
manual
packing materials to protect your telephone if you ever it back. The handset shows
alternately. The
Registered and you hear a beep
need to ship it.
handset does not
when the registration process
Avoid water
work at all.
completes. This process takes
Your telephone can be damaged if it gets wet. Do not
about 90 seconds to complete.
use the handset outdoors in the rain, or handle it with
wet hands. Do not install the telephone base near a
sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power surges
harmful to electronic equipment. For your own safety, take
caution when using electrical appliances during storms.
Review call block list Ringer volume (handset)
Press MENU when the phone is not in use. You can adjust the ringer volume level, or turn
1.
the ringer off.
2. Scroll to Call block, and then press
SELECT. 1. Press MENU when the handset is not in use.
3. Scroll to Block list, and then press 2. Scroll to Ringers, and then press SELECT.
SELECT.
3. Scroll to choose Home volume or Cell
4. Press SELECT to choose Review. volume, and then
press SELECT.
Edit a call block list entry
4. Scroll to adjust the volume, and then press
1. When the desired entry displays, press SELECT to save.
SELECT.
NOTE
2. Use the dialing keys to edit the number, and
If the handset ringer volume is set to off, that handset
then press SELECT.
is silenced for all incoming calls except paging tone.
3. Use the dialing keys to edit the name, and
then press SELECT to save.
Ringer volume (telephone base)
You can adjust the telephone base volume
Save a caller ID log entry to call block list
– +
level by pressing /VOL/ on the top of the
1. When the desired caller ID log entry
telephone base when idle.
displays, press SELECT.
Temporary ringer silencing
2. Scroll to To Call block then press SELECT.
3. Use the dialing keys to modify the number, When the telephone is ringing, you can
and then press SELECT. temporarily silence the ringer of the handset
without disconnecting the call. The next call rings
4. Use the dialing keys to modify the name,
normally at the preset volume.
and then press SELECT to save.
• Press OFF or MUTE on the handset. The
handset displays .
Delete a call block list entry
• When the desired call block list entry
displays, press DELETE. About answering system and
voicemail service
Sound settings
For message recording, your telephone has a
built-in answering system, and it also support
voicemail service offered by your telephone
Key tone
service provider (subscription is required, and
You can choose from different ringer tones.
fee may apply).
1. Press MENU when the handset is not in use.
The main differences between them are as
2. Scroll to Settings, and then press SELECT. follows:
3. Scroll to choose Key tone, and then press
Built-in answering Voicemail from
SELECT. Category
system telephone service
4. Scroll to choose On or Off, and then press
Messages are Messages are
Storage
SELECT to save.
stored in the stored in a server
telephone base. or system provided
Ringer tone
by your telephone
service.
You can choose from different ringer tones.
Your messages Your messages
1. Press MENU when the handset is not in use.
will not be deleted may be
2. Scroll to Ringers, and then press SELECT.
automatically. automatically
3. Scroll to choose Home ringtone or Cell deleted after a
You have to delete
ringtone, and then press SELECT. period of time.
your messages
4. Scroll to sample each ringer tone, and then manually. Contact your
press SELECT to save. telephone service
provider for more
NOTE
details.
If you turn off the ringer volume, you will not hear ringer
tone samples.
I cannot add and Make sure you have cellular The messages If a caller leaves a very long
connect my cell coverage and the Bluetooth on the answering message, part of it may be lost
phone or headset function of your cell phone or system are when the answering system
to the telephone headset is turned on. See the incomplete. disconnects the call after the
base. user's manual of your cell phone preset recording time.
or headset for more information.
If the memory on the answering
Make sure that the telephone
system becomes full during a
base is in discoverable mode.
message, the answering system
stops recording and disconnects
Carefully follow the pairing
instructions in this manual. Make the call.
sure that your Bluetooth cell phone
I accidentally While the handset is not in use,
or headset is not connected to
set my LCD press MENU and then enter
any other Bluetooth device, and is
language to 364 to change the handset
connected to the telephone base
Spanish or LCD language back to English.
and active on the device list.
French, and I
Turn off your cell phone or don't know how
headset, and then turn it on again. to change it back
to English.
The cell phone If there is a location in your
reception in my house with better reception, you
house is poor can leave your cell phone at
and I cannot that location while you use the Limited warranty
connect it to my DS6621 cell line. In order for
DS6621. this to work, the telephone base
What does this limited warranty cover?
must be within 30 feet of the cell
phone. The manufacturer of this VTech Product warrants to
the holder of a valid proof of purchase ("Consumer" or
The answering Make sure the answering system
"you") that the Product and all accessories provided
system does is on. When the answering system
in the sales package ("Product") are free from
not record is on, ANS ON should display on
defects in material and workmanship, pursuant to the
messages. the handset and the telephone
following terms and conditions, when installed and
base.
used normally and in accordance with the Product
operating instructions. This limited warranty extends
When the answering machine
only to the Consumer for Products purchased and
memory is full, it does not record
used in the United States of America and Canada.
new messages until some old
messages are deleted.
What will VTech do if the Product is not free from
defects in materials and workmanship during
If you subscribe to voicemail
the limited warranty period ("Materially Defective
service, change the number of
Product")?
rings so that your answering
During the limited warranty period, VTech's authorized
system answers before your
service representative will repair or replace at VTech's
voicemail service answers. To
option, without charge, a Materially Defective Product. If
determine how many rings activate
we repair the Product, we may use new or refurbished
your voicemail service, contact your
replacement parts. If we choose to replace the Product,
telephone service provider.
we may replace it with a new or refurbished Product
The answering Make sure you have set the date
of the same or similar design. We will retain defective
system does and time. See Configure your parts, modules, or equipment. Repair or replacement
telephone section. of the Product, at VTech's option, is your exclusive
not announce
remedy. VTech will return the repaired or replacement
the correct day
Products to you in working condition. You should expect
of the week
the repair or replacement to take approximately 30 days.
for recorded
messages time
How long is the limited warranty period?
stamp.
The limited warranty period for the Product extends for
ONE (1) YEAR from the date of purchase. If VTech
repairs or replaces a Materially Defective Product
under the terms of this limited warranty, this limited
warranty also applies to the repaired or replacement
Product for a period of either (a) 90 days from the
date the repaired or replacement Product is shipped to
you or (b) the time remaining on the original one-year
warranty; whichever is longer.
When you received When you received Set your built-in answering system
Method
new messages, new messages,
to retrieve
handset displays the handset
messages
Your answering system has various features,
XX new messages displays and
read below for the basic settings.
and the message New voicemail.
window on the The answering system can record and store
telephone base up to 99 messages. Each message can be up
flashes.
to three minutes in length. The total storage
capacity for the announcement, messages and
To retrieve To retrieve
memos is approximately 23 minutes. The actual
messages, usually messages, you
there are two ways: need an access recording time depends on individual message
number and/or a characteristics.
• Press a button
passcode provided
on the telephone Your answering system allows you to set your
by your telephone
base; or
announcement, to save and delete messages,
service provider.
• Access remotely
activate call screening, to set number of rings
with an access
before pick up, to access remotely, and to
code.
control the recording time.
Turn the answering system on or off
The answering system must be turned on to
Telephone base control key panel: answer and record messages.
To turn on or off with the telephone base:
• Press /ANS ON on the telephone base to turn
the built-in answering system on or off.
To turn on or off with the handset:
1. Press MENU when the phone is not in use.
2. Scroll to highlight Answering sys, and then
press SELECT.
Scroll to highlight Answer on/off, and then
3.
press SELECT.
4. Scroll to highlight On or Off, and then press
SELECT to save. You hear a confirmation tone.
Default announcement
The telephone is preset with a greeting that
answers calls with "Hello, please leave a
message after the tone." You can use this preset
announcement, or replace it with your own.
Record your own announcement
The announcement can be up to 90 seconds in
length.
1. Press MENU when the phone is not in use.
2. Scroll to Answering sys and then press
SELECT twice.
3. The handset announces, "Announcement,
press play or press record."
4. Press 7 to record. The handset announces,
"Record after the tone. Press STOP when you
are done." After the tone, speak towards the
handset microphone. Then, press 5 when done.
What is not covered by this limited warranty? identifying the Product purchased (Product model)
and the date of purchase or receipt; and
This limited warranty does not cover:
3. Provide your name, complete and correct mailing
1. Product that has been subjected to misuse,
address, and telephone number.
accident, shipping or other physical damage,
improper installation, abnormal operation or
Other limitations
handling, neglect, inundation, fire, water or other
This warranty is the complete and exclusive agreement
liquid intrusion; or
between you and VTech. It supersedes all other
2. Product that has been damaged due to repair,
written or oral communications related to this Product.
alteration or modification by anyone other than an
VTech provides no other warranties for this Product.
authorized service representative of VTech; or
The warranty exclusively describes all of VTech's
3. Product to the extent that the problem experienced
responsibilities regarding the Product. There are no
is caused by signal conditions, network reliability,
other express warranties. No one is authorized to make
or cable or antenna systems; or
modifications to this limited warranty and you should not
4. Product to the extent that the problem is caused
rely on any such modification.
by use with non-VTech accessories; or
State/Provincial Law Rights: This warranty gives you
5. Product whose warranty/quality stickers, product
specific legal rights, and you may also have other rights,
serial number plates or electronic serial numbers
which vary from state to state or province to province.
have been removed, altered or rendered illegible; or
Limitations: Implied warranties, including those of
6. Product purchased, used, serviced, or shipped for
fitness for a particular purpose and merchantability (an
repair from outside the United States of America
unwritten warranty that the Product is fit for ordinary
or Canada, or used for commercial or institutional
use) are limited to one year from the date of purchase.
purposes (including but not limited to Products
Some states/provinces do not allow limitations on how
used for rental purposes); or
long an implied warranty lasts, so the above limitation
7. Product returned without a valid proof of purchase
may not apply to you. In no event shall VTech be liable
(see item 2 on the next page); or
for any indirect, special, incidental, consequential,
8. Charges for installation or set up, adjustment or similar damages (including, but not limited to lost
of customer controls, and installation or repair of profits or revenue, inability to use the Product or
systems outside the unit. other associated equipment, the cost of substitute
equipment, and claims by third parties) resulting from
How do you get warranty service?
the use of this Product. Some states/provinces do
To obtain warranty service in the USA, please visit our not allow the exclusion or limitation of incidental or
website at www.vtechphones.com or call consequential damages, so the above limitation or
1 (800) 595-9511. In Canada, go to exclusion may not apply to you.
www.vtechcanada.com or call 1 (800) 267-7377.
Please retain your original sales receipt as
NOTE: Before calling for service, please review the
proof of purchase.
user's manual - a check of the Product's controls and
features may save you a service call.
Except as provided by applicable law, you assume the
risk of loss or damage during transit and transportation
and are responsible for delivery or handling charges
incurred in the transport of the Product(s) to the service
location. VTech will return repaired or replaced Product
under this limited warranty. Transportation, delivery
or handling charges are prepaid. VTech assumes no
risk for damage or loss of the Product in transit. If the
Product failure is not covered by this limited warranty,
or proof of purchase does not meet the terms of this
limited warranty, VTech will notify you and will request
that you authorize the cost of repair prior to any further
repair activity. You must pay for the cost of repair and
return shipping costs for the repair of Products that are
not covered by this limited warranty.
What must you return with the Product to get
warranty service?
1. Return the entire original package and contents
including the Product to the VTech service location
along with a description of the malfunction or
difficulty; and
2. Include a "valid proof of purchase" (sales receipt)
Play the announcement Voice guide
1. Press MENU when the phone is not in use. This feature is an alternative way for you to
do the basic setup of the answering system.
2. Scroll to Answering sys and then press
You can follow the voice guide to record your
SELECT twice.
own announcement, set the number of rings
3. The handset announces, "Announcement,
and the message alert tone.
press play or press record."
1. Press MENU when the phone is not in use.
4. Press 2 to play the announcement.
2. Scroll to scroll to Answering sys, and then
Delete the announcement press SELECT.
1. Press MENU when the phone is not in use. 3. Scroll to highlight Voice guide, and then
press SELECT. You hear the voice prompt
2. Scroll to Answering sys and then press
"Hello! This voice guide will assist you with
SELECT twice.
the basic setup of your answering system."
3. The handset announces, "Announcement,
4. Setup your answering system by inputting
press play or press record."
designated numbers as instructed in the
4. Press 3 to delete your own recorded
voice guide.
announcement.
Set number of rings
Use your built-in answering system
You can set the answering system to answer an
incoming call after 2, 3, 4, 5 or 6 rings; or toll saver. If
New message indication
you choose toll saver, the answering system answers
When there are new answering system
a call after 2 rings when you have new messages, or
messages, The handset displays XX new
after 4 rings when you have no new messages.
messages and the message window on the
1. Press MENU when the phone is not in use.
telephone base flashes.
2. Scroll to Answering sys then press SELECT.
Message playback
3. Scroll to Ans sys setup then press SELECT.
To playback messages at the telephone base:
4. Scroll to # of rings then press SELECT.
• P ress /PLAY when the phone is not in use.
5. Scroll to choose choose 2, 3, 4, 5, 6 or Toll saver.
Options during playback:
6. Press SELECT to save and you hear a
– +
• Press /VOL/ to adjust the speaker volume.
confirmation tone.
• Press /SKIP to skip to the next message.
Message alert tone
• Press /REPEAT to repeat the message
When the message alert tone is set to on, currently playing. Press /REPEAT twice to
and there is at least one new message, the
listen to the previous message.
telephone base beeps every 10 seconds. The X/DELETE
• Press to delete the playing
message alert tone is preset to off.
message. The system advances to the next
message.
1. Press MENU when the phone is not in use.
• Press /STOP to stop.
2. Scroll to Answering sys then press SELECT.
To playback messages at the handset:
Scroll to Ans sys setup then press SELECT.
3.
• Press MENU to choose Play messages.
4. Scroll to Msg alert tone then press SELECT.
Press SELECT.
5. Scroll to choose choose On or Off.
Options during playback:
6. Press SELECT to save and you hear a
• Press VOLUME/ or VOLUME/ to adjust
confirmation tone.
the message playback volume.
• Press 6 to skip to the next message.
• Press 4 to repeat the message. Press 4
during the time and day announcement to
hear the previous message.
Press 3 to delete the playing message.
•
• Press OFF to stop the playback.
• Press to switch between speakerphone
mode and handset mode.
Technical specifications
Transmit DECT frequency:
frequency 1921.536-1928.448 MHz
Bluetooth frequency:
2402.000-2480.000 MHz
Channels DECT: 5
Bluetooth: 79
Nominal Maximum power allowed by FCC and
effective IC. Actual operating range may vary
range according to environment conditions at
the time of use.
Power Handset: 2.4V Ni-MH battery
requirements
Telephone base: 6V DC @ 400mA
Charger: 6V AC @ 300mA
Memory Phonebook:
1000 memory locations (shared
between home and cell lines); up to
30 digits and 15 characters
Caller ID log:
50 memory locations; up to 24 digits and
15 characters
®
The Bluetooth word mark and logos are owned by
Bluetooth SIG, Inc. and any use of such marks by VTech
Holdings Limited is under license. VTech Holdings Limited
is a member of Bluetooth SIG, Inc. Other trademarks and
trade names are those of their respective owners.
Specifications are subject to change without notice.
© 2014 for VTech Communications, Inc.
All rights reserved. 12/14. DS6621_ACIB_V7.0
Document order number: 91-007312-070-100